Evaluating Black Myth: Wukong against other titles
Evaluating Black Myth: Wukong against other titles
You're gearing up for Black Myth: Wukong and have been tweaking settings on your rig. I've checked out the benchmarking data from your setup—1440p at 5600X with 6900 XT and 16GB RAM at 3200Mhz. Your results show varying performance across different FSR options. For others with similar hardware, how do your numbers stack up? Let me know if you want to dive deeper into the comparisons!
It seems to perform smoothly, don’t stress about ray tracing—just tried it out and didn’t see a big change during games. You’ll only notice a difference if you concentrate, capture screenshots, and zoom in closely. For regular gaming, Ultra settings look great.
It's not a major issue. People often mention a bottleneck, like the 7800x3D + 4090 setup which also struggles. The focus should be on smooth performance. Is 60 frames per second sufficient for Ultra? If yes, then the 5600x is performing well; otherwise, you might need a faster processor. A minimum of 40 fps is enough to make games look good, but if you're playing fast-paced or reactive games, lower fps can be okay. With FSR enabled, you usually stay above 60 fps with Ultra settings, which means smoother gameplay—though it still depends on your monitor and CPU speed. I also have an 165Hz display, so smoothness isn't always perfect at steady 60 fps, but with FSR it's closer to 80 fps. Another factor is actual gain; sometimes FPS drops below 50 during Ultra Graphics, which can be due to various reasons. The main concern is overall fluidity—check the screenshot for any microstutters or uneven motion. These issues usually point to CPU limitations rather than the game itself. If you're unsure, look at other games you play and see if they show similar problems. For a more accurate reading, use a benchmark tool that tracks low FPS percentages. The final advice is to consider the game's current state and whether it might get updated; also, verify with other titles for consistency.
Thanks for the thorough explanation! It's comforting to know the 5600X won't cause major delays for the 6900XT, particularly at 1440p. I'll monitor the 1% and 0.1% frames for any stuttering, but currently 60 FPS on Ultra with FSR enabled is functioning smoothly. If I see any slowdowns in fast action games, I might think about upgrading the CPU later. Thanks for the guidance!
I checked the tool but noticed that with full tracing enabled at a high level, it defaults to a higher setting after the benchmark. This option isn’t listed, which makes me worried it might be running at a lower setting than intended. It also looks like the benchmarks vary across different settings, so it’s possible others are experiencing similar issues.