Ethernet Splitter Hub connects multiple devices to a single network source.
Ethernet Splitter Hub connects multiple devices to a single network source.
You're looking to link your PC and router directly to the modem using an Ethernet cable, avoiding the router's high ping issues. Using a splitter hub could help route the signal from the modem to both devices, but make sure it supports the required speed. Your friend might have had a good tip, so keep an eye out for more reliable advice!
The modem uses just one IP address. When linked to a switch or hub, only that device can communicate. Your connection becomes fully open to the internet.
never encountered a contemporary modem with just one Ethernet port. most come with four. do you lease or purchase your modem? if you rent or it’s bundled with your internet service, you might want to check if your ISP can upgrade your gear. this is how it usually works—you may wish to consider updating your modem so you get the equipment you need with fewer components. currently, the only choices I see are: 1. if your present modem functions as a true router, it can allocate IP addresses beyond the public one assigned by your ISP; you’ll require a switch. 2. if it’s a basic unit where the sole IP is the one provided by your ISP, then you’ll need a router.
I’m unable to upgrade the router since it’s a Korean model, and my parents require this specific device to make calls to Korea without additional fees. The included internet phone is only compatible with that router.
As mentioned before, you'll need a router or DCHP server to give IP addresses to your PC and other network equipment. If your current router still supports IP phones, consider replacing it with a new one positioned between your old router and your PC. This setup resembles the diagram shown below: modem | new router / \ | / \ old router PC other devices / IP phone. Be sure your new router operates on a separate subnet from the old one.