Ethernet signal loss issue Drop out on Ethernet connection
Ethernet signal loss issue Drop out on Ethernet connection
You can visit the manufacturer's website directly for the most accurate and up-to-date information.
It's tricky to fix these Ethernet problems since there aren't many guides showing how others solved them.
Use Intel's official driver from their support site. OEM drivers often lag behind updates. It might not be a driver problem—run a speed test to check performance and search for issues on Google or similar sites.
Click "Start" -> Enter "Control Panel" -> Press Enter. Locate the desired program or driver and select "Uninstall." This option appears under Programs. Note that TensorVortex mentioned it’s a guess, and it might not actually help much, but it could be worth a try when no other solution seems available.
Power line mentioned? Is your powerline linked to the same outlet as your computer? IF YES, relocate it, place it elsewhere. Probably because your graphics card gets busy and adds noise into the line, particularly at that old outlet. Switching outlets on both sides might help if you’re knowledgeable—each costs around $1.50. I do this for all my powerline adapters; it’s the only way to ensure a solid, worry-free connection. You might also face packet loss elsewhere. If your router or switch is down, it could cause sudden drops in service. Start by running a ping test: open several command prompts and try pinging google.com, 127.0.0.1, and 192.168.1.1 (or whatever your router’s IP is). Change the number to 10000+ if you need a longer test. To stop the test, press Control + C and listen for replies—success means no failures. You can also monitor pings while playing games. If everything skips completely, it could point to Windows issues, driver problems, or faulty hardware. If only google.com appears missing, your modem is likely failing or there’s a problem on the network side. Then contact your ISP and consider replacing the modem first. (Remember, your modem might double as a router/switch.) But if 192.168.1.1 or both skip, it may indicate a problem between your network device and the switch/router/modem—like a weak powerline connection or a dead LAN port. You could have a faulty modem, a dying LAN side, or even just one or two ports failing. Powerline adapters are often sensitive; they tend to be unstable when connected to worn outlets or near high-power devices like motors. Replace the outlet or move the device to a different spot in the room. Make sure the adapter stays firmly in place—any movement can disrupt the signal. A steady green light usually means good connection. If it’s flickering or unstable even when idle, you likely have a poor link. Turning on all devices and checking the connection strength indicator can help. If you can’t fix the outlet due to time or skill limits, choose the best available outlet and use it wisely. THIS applies to both ends of your setup! I’ve even had to adjust wiring in breakers and outlets. You’ll be surprised by what you discover—sometimes frustration comes from carelessness, especially with grounding issues. Try these steps and let me know the results from your ping test. Those numbers will help identify which devices are causing the problem.
These results show normal performance. No significant issues detected. For the powerline concern, consider adding physical Ethernet ports if needed.
Additionally, the sole device connected to the powerline adapters is my 5-port network switch, handling all tasks except my PC, which I believed could be the problem. Other devices like Xbox, PS4 and the second PC are typically powered off, while my main PC connects via the second port on the adapter.