Establish a network link using Ethernet.
Establish a network link using Ethernet.
Hey there, let's break this down. You're looking to get the best Ethernet speeds possible from your office computer. You have a phone line and a Cat 6 port in your garage, but only the Cat 6 is available in your office. You're thinking about connecting your modem to the phone port, then using the Ethernet port to link to your Cat 6 cable. That sounds like a solid setup.
Since your modem is about 10 meters away, you might want to consider running a direct Cat 6 cable from the modem straight to your office computer for optimal performance. Using Cat 5e or older could limit your speeds, especially over that distance.
Also, make sure both connections use Cat 6 cables—your current setup is only Cat 5 atm, which won’t give you the speeds you're aiming for. Once your modem arrives, you’ll be all set to connect properly and enjoy faster internet. You're definitely on the right track!
Usually all your Ethernet ports in the house connect to a single location, such as a panel. You generally want to insert a switch into that panel, then link all the ports together.
The only visible parts are the ones shown. I also have a few Cat 6-only power outlets in other bedrooms. I think they’re all linked through the walls. Once the modem is plugged into the RJ45/Cat6 panel, should everything function? So essentially, it comes down to connecting the one in my office to the Ethernet port via Cat6 to that Cat 6-only panel? Cheers.
there is almost always some sort of patch panel somewhere in your house that all of these cables run to. Are you sure there is no panel. Try checking all the closets.
I've searched throughout my unit for what you mentioned, like cupboards and similar items, but haven't found anything matching your description. Could it be a different setup in Australia?
I've looked into it thoroughly, and the only relevant info is about wiring. I reside in a brand-new building, and Australia has improved its network with an NBN service (National Broadband Network). This enhancement applies to my location. Most providers use FTTN or FTTH solutions. I believe all connections ultimately reach the central node on the street. I've checked numerous sources for what you mentioned, but couldn't locate any matching details. Thank you for your assistance.
It looks like you don’t need a patch panel. You simply connect your modem/router into the RJ45 port and link its Cat 5/6 output to the Cat 6 port on your modem/router. Then attach your PCs’ Ethernet ports using Cat 6 cables to the Cat 6 outlet. You’ve selected a FTTN plan offering 50Mbps speed. Thanks.