F5F Stay Refreshed Hardware Desktop Error occurred with XMP file system.

Error occurred with XMP file system.

Error occurred with XMP file system.

X
xbagu
Junior Member
39
08-21-2021, 08:15 AM
#1
I updated a new M.2 drive to Windows 11 today. After rebooting, the system would freeze briefly before stabilizing. Once it started working, it ran smoothly. When I turned XMP back on, the PC booted at 3200MHz and looped, resetting back to factory settings. It worked without issues at that speed for about two years until this installation. Any advice? I’ve moved RAM sticks and reset CMOS settings before, but nothing changed.
X
xbagu
08-21-2021, 08:15 AM #1

I updated a new M.2 drive to Windows 11 today. After rebooting, the system would freeze briefly before stabilizing. Once it started working, it ran smoothly. When I turned XMP back on, the PC booted at 3200MHz and looped, resetting back to factory settings. It worked without issues at that speed for about two years until this installation. Any advice? I’ve moved RAM sticks and reset CMOS settings before, but nothing changed.

B
blockyroad122
Junior Member
20
09-01-2021, 01:23 AM
#2
The M.2 slot connects directly to the PCIe bus and may be affecting system stability, especially with memory components. Consider slightly raising your VCCSA voltage to around 1.2 volts, and adjust VCCIO and DRAM voltage up to 1.4 volts if needed.
B
blockyroad122
09-01-2021, 01:23 AM #2

The M.2 slot connects directly to the PCIe bus and may be affecting system stability, especially with memory components. Consider slightly raising your VCCSA voltage to around 1.2 volts, and adjust VCCIO and DRAM voltage up to 1.4 volts if needed.

D
Derpziez
Junior Member
39
09-01-2021, 03:11 AM
#3
I used my friend Ram Kit's XMP on, and it functioned properly. Not sure about anything else.
D
Derpziez
09-01-2021, 03:11 AM #3

I used my friend Ram Kit's XMP on, and it functioned properly. Not sure about anything else.

M
missyT1396
Member
189
09-01-2021, 03:57 AM
#4
You've noticed the system keeps looping despite changes, and the power stays on with a blue light. Try updating your BIOS, checking for hardware conflicts, or resetting the motherboard. If issues persist, contact support for further help.
M
missyT1396
09-01-2021, 03:57 AM #4

You've noticed the system keeps looping despite changes, and the power stays on with a blue light. Try updating your BIOS, checking for hardware conflicts, or resetting the motherboard. If issues persist, contact support for further help.

J
Jupieter
Junior Member
4
09-02-2021, 11:09 AM
#5
Updating the BIOS becomes trickier with four sticks compared to two. That’s exactly how it is.
J
Jupieter
09-02-2021, 11:09 AM #5

Updating the BIOS becomes trickier with four sticks compared to two. That’s exactly how it is.

I
II_RIPTIDE_II
Member
167
09-02-2021, 11:22 AM
#6
Just updated the bios and added a few tweaks.
I
II_RIPTIDE_II
09-02-2021, 11:22 AM #6

Just updated the bios and added a few tweaks.

O
Okunino
Posting Freak
845
09-02-2021, 12:19 PM
#7
A poor Windows setup might lead to issues similar to what you described.
O
Okunino
09-02-2021, 12:19 PM #7

A poor Windows setup might lead to issues similar to what you described.