Error encountered with new GPU installation. Blue screen appears.
Error encountered with new GPU installation. Blue screen appears.
I recently changed my graphics card from an ASUS GTX 1650 to a Gigabyte RTX Eagle OC 3060 (Dual Fan). After two days of use I encountered the attached Blue Screen Of Death (PFN_LIST_CORRUPT). Here’s what I have:
- Power Supply Unit: Corsair VS500
- CPU: i3-9100
- Graphics Card: Gigabyte RTX 3060 Eagle OC (12GB)
- RAM: 8 GB DDR4 3200Mhz (XPG D60)
- RAM: 8 GB DDR4 2666Mhz (Simmtronics)
- Storage: 1TB Western Digital HDD
- M.2 SSD (boot drive): 250GB Adata
I’m struggling to identify the cause of the BSoD. I’ve tried several fixes: reinstalling Windows, formatting both the HDD and SSD for a fresh install, removing all RGB software, and installing only licensed applications. I also removed all graphics drivers.
The issue occurs repeatedly under certain conditions:
- Running multiple RGB devices (headphones, keyboard, GPU, etc.)
- Playing games like Genshin Impact while using Spotify
- Installing GTA V
- Booting from the PC and pressing the power button immediately after installation
- The PC starts up normally but shows the same error
It’s happening even when the system is not hot or drawing power. I’m unsure whether the problem lies with the GPU, PSU, or RAM. Could you help me figure out which part is responsible? I’d only need to replace one component if it’s the answer.
I'm focusing more on software solutions, so I wouldn't suggest spending money right now. Given the GPU is the newest component, I'd prioritize updating the GPU drivers and installing the latest NVIDIA drivers. Start it in safe mode, then after rebooting, apply the newest drivers. https://www.guru3d.com/files-details/dis...nload.html I just noticed you reinstalled Windows already—reinstalling might be a good idea anyway without any risk. Following that, consider running the command "sfc /scannow" via cmd (as administrator). Clearing the CMOS afterward could help, but be aware it resets all BIOS settings, so you may need to adjust boot order, XMP/DPOC settings, and more.
Hi thanks for the reply, how do i clear CMOS? i have already done SCANNOW and uninstalled/reinstalled GeForce drivers MULTIPLE times. I did try Memtest86 and following were the results Also i wouldn't be needing to reconfigure anything in BIOS since I've been using it in default settings ever since it came, would i?
It seems you likely won’t need major adjustments. You might not have to reset the CMOS; simply turning off XMP could let RAM run at its default 2133MHz. The errors are pointing toward RAM being the problem. Test with RAM at 2133MHz and run MemTest again to check for stability issues.
Currently I'm testing one RAM stick per slot each day. My motherboard has two slots, so I'll switch between RAM1 and RAM2 daily. If I don't run into issues, I'll continue this pattern. Should I encounter problems with either, it might be time to check the power supply or graphics card instead.