F5F Stay Refreshed Hardware Desktop Error encountered with debugging code on a 10-computer system.

Error encountered with debugging code on a 10-computer system.

Error encountered with debugging code on a 10-computer system.

D
doomddomp
Member
Find
98
09-30-2019, 11:23 PM
#1
Hello, I just completed assembling a new PC but when I power it up it immediately activates all fans and RGB lights, then shows code 02 before shutting down repeatedly. The process loops endlessly without any output reaching the monitor, preventing access to BIOS settings. My system includes: AsRock X570 Taichi, AMD Ryzen 7 3700X, Corsair Vengeance LPX 2x8 GB 3600MHz (CMK16GX4M2D36000C18), GTX 670, a 2TB Western Digital WD2002FAEX drive, an Adata SU800 SSD, and a 525W Extreme PSU from Cooler Master. I recently updated the BIOS to the latest version, which eliminated error code 02 but introduced a new error code 10. The PC still powers on fans and displays the error code on the motherboard, causing crashes and repeated attempts to restart.
Reply
Reply
D
doomddomp
09-30-2019, 11:23 PM #1

Hello, I just completed assembling a new PC but when I power it up it immediately activates all fans and RGB lights, then shows code 02 before shutting down repeatedly. The process loops endlessly without any output reaching the monitor, preventing access to BIOS settings. My system includes: AsRock X570 Taichi, AMD Ryzen 7 3700X, Corsair Vengeance LPX 2x8 GB 3600MHz (CMK16GX4M2D36000C18), GTX 670, a 2TB Western Digital WD2002FAEX drive, an Adata SU800 SSD, and a 525W Extreme PSU from Cooler Master. I recently updated the BIOS to the latest version, which eliminated error code 02 but introduced a new error code 10. The PC still powers on fans and displays the error code on the motherboard, causing crashes and repeated attempts to restart.

Reply
Reply
J
jmk_0605
Member
Find
65
10-21-2019, 07:48 PM
#2
It seems like you're experiencing memory issues. Try reseating your modules or verify they're in the correct slots.
Reply
Reply
J
jmk_0605
10-21-2019, 07:48 PM #2

It seems like you're experiencing memory issues. Try reseating your modules or verify they're in the correct slots.

Reply
Reply
Z
Zikblackniggg
Member
Find
145
10-22-2019, 02:36 AM
#3
Thank you for your feedback. I attempted several solutions but none resolved the issue. I also tried using just one stick and moving RAM to other slots, yet the problem persisted. Currently, my RAM is installed in A2 and B2 slots.
Reply
Reply
Z
Zikblackniggg
10-22-2019, 02:36 AM #3

Thank you for your feedback. I attempted several solutions but none resolved the issue. I also tried using just one stick and moving RAM to other slots, yet the problem persisted. Currently, my RAM is installed in A2 and B2 slots.

Reply
Reply
K
kiwipav1
Junior Member
Find
47
10-22-2019, 03:19 AM
#4
Reset the CMOS. If problems persist, consider using a different power supply.
Reply
Reply
K
kiwipav1
10-22-2019, 03:19 AM #4

Reset the CMOS. If problems persist, consider using a different power supply.

Reply
Reply
M
Mihnea_X
Member
Find
63
10-27-2019, 07:57 AM
#5
Thank you for the input. I attempted to reset CMOS but it didn't resolve the issue. I'll consider switching to a different power supply.
Reply
Reply
M
Mihnea_X
10-27-2019, 07:57 AM #5

Thank you for the input. I attempted to reset CMOS but it didn't resolve the issue. I'll consider switching to a different power supply.

Reply
Reply
P
poler199
Member
Find
74
10-28-2019, 09:39 PM
#6
Yes, it's worth a shot. The one you have isn't recognized for its quality. By now, you're about 50% likely the PSU is faulty.
Reply
Reply
P
poler199
10-28-2019, 09:39 PM #6

Yes, it's worth a shot. The one you have isn't recognized for its quality. By now, you're about 50% likely the PSU is faulty.

Reply
Reply
M
miknes123
Senior Member
Find
646
10-28-2019, 11:35 PM
#7
The PSU was functioning after connecting it to my previous setup. It should supply sufficient power for my current build, though I might consider switching to a different one.
Reply
Reply
M
miknes123
10-28-2019, 11:35 PM #7

The PSU was functioning after connecting it to my previous setup. It should supply sufficient power for my current build, though I might consider switching to a different one.

Reply
Reply
L
liang_hao_yan
Member
Find
221
11-18-2019, 05:24 PM
#8
Keep in mind the 525w is listed as peak output. This doesn't reflect initial startup or steady draw. I used an Antec earth watt 500w unit and it behaved similarly, but after moving to a different home, the PSU wouldn't power the rig. I didn't alter anything except the location, and it only ran about twice before stopping. That was roughly 11 years ago.
Reply
Reply
L
liang_hao_yan
11-18-2019, 05:24 PM #8

Keep in mind the 525w is listed as peak output. This doesn't reflect initial startup or steady draw. I used an Antec earth watt 500w unit and it behaved similarly, but after moving to a different home, the PSU wouldn't power the rig. I didn't alter anything except the location, and it only ran about twice before stopping. That was roughly 11 years ago.

Reply
Reply