F5F Stay Refreshed Hardware Desktop Error encountered during startup: system fails to enter BIOS.

Error encountered during startup: system fails to enter BIOS.

Error encountered during startup: system fails to enter BIOS.

S
Spaceface16518
Senior Member
564
07-09-2022, 05:27 PM
#1
I’m facing issues with a refurbished build I’m donating. It had an old CPU and SSD, but after updating the BIOS it still worked perfectly. When I try pressing F2 or DEL, it jumps straight to the American Megatrends screen instead of entering BIOS. I’ve tested booting without a flash drive or any external devices, and the same problem persists. Removing the CMOS battery and short-circuiting the pins didn’t help. The system shows as Ryzen 5 5500, GTX 1080, DDR4 3600mHz, and uses an Asus ROG Strix B450-F motherboard with an EVGA 600 BQ power supply.
S
Spaceface16518
07-09-2022, 05:27 PM #1

I’m facing issues with a refurbished build I’m donating. It had an old CPU and SSD, but after updating the BIOS it still worked perfectly. When I try pressing F2 or DEL, it jumps straight to the American Megatrends screen instead of entering BIOS. I’ve tested booting without a flash drive or any external devices, and the same problem persists. Removing the CMOS battery and short-circuiting the pins didn’t help. The system shows as Ryzen 5 5500, GTX 1080, DDR4 3600mHz, and uses an Asus ROG Strix B450-F motherboard with an EVGA 600 BQ power supply.

Y
YTApex
Junior Member
10
07-09-2022, 06:42 PM
#2
Use F1 to launch the setup. BIOS on boards is frequently referred to as setup.
Y
YTApex
07-09-2022, 06:42 PM #2

Use F1 to launch the setup. BIOS on boards is frequently referred to as setup.

N
NoHaxJustADoge
Member
70
07-11-2022, 05:37 AM
#3
AMI employs F1, F2 or DEL for accessing BIOS settings. It seems your system likely uses F1.
N
NoHaxJustADoge
07-11-2022, 05:37 AM #3

AMI employs F1, F2 or DEL for accessing BIOS settings. It seems your system likely uses F1.

D
Dovi007
Member
78
07-11-2022, 12:13 PM
#4
I noticed you mentioned it before, but you didn’t say what you meant. Could you clarify your request?
D
Dovi007
07-11-2022, 12:13 PM #4

I noticed you mentioned it before, but you didn’t say what you meant. Could you clarify your request?

R
RwarCatz
Member
67
07-13-2022, 11:07 AM
#5
I completely missed mentioning that I've done it before, that's my mistake. However, I've tried so far without success.
R
RwarCatz
07-13-2022, 11:07 AM #5

I completely missed mentioning that I've done it before, that's my mistake. However, I've tried so far without success.

T
TRy_iTempo_
Junior Member
27
07-15-2022, 03:25 AM
#6
The command initiates a shutdown of the system, forces a reboot, and then restarts it using the BIOS. This action will terminate any running processes before powering off the machine.
T
TRy_iTempo_
07-15-2022, 03:25 AM #6

The command initiates a shutdown of the system, forces a reboot, and then restarts it using the BIOS. This action will terminate any running processes before powering off the machine.

N
NikoMash
Senior Member
335
07-16-2022, 01:00 PM
#7
Two keyboards available
N
NikoMash
07-16-2022, 01:00 PM #7

Two keyboards available

J
javosan
Member
76
07-17-2022, 06:14 AM
#8
It seems the system was confusing two keyboards at first, but after changing one, everything worked properly. I’m still unsure what caused the problem with the keyboard, but it’s resolved now.
J
javosan
07-17-2022, 06:14 AM #8

It seems the system was confusing two keyboards at first, but after changing one, everything worked properly. I’m still unsure what caused the problem with the keyboard, but it’s resolved now.

X
Xo_PVP_Girl_oX
Senior Member
500
07-22-2022, 04:30 PM
#9
The Bios failed to interpret the previous keyboard, missing any Key input from that device. The updated keyboard's input was successfully detected by the system.
X
Xo_PVP_Girl_oX
07-22-2022, 04:30 PM #9

The Bios failed to interpret the previous keyboard, missing any Key input from that device. The updated keyboard's input was successfully detected by the system.