Error encountered during driver installation.

Pages (2): 1 2 Next

OldManIceCubes
Junior Member

07-18-2016, 10:19 PM

The PC with a 1060 started showing issues after replacing cables and a monitor. After swapping in a spare monitor, the problem persisted with red dots and a black screen during installation. Attempts to fix it with DDU and HDMI cords didn’t resolve the issue. Now there’s no display at all, even in safe mode. It seems the hardware may be faulty. Consider replacing the 1060 if possible.

OldManIceCubes

07-18-2016, 10:19 PM #1

naTe_coRe_1084
Senior Member

254

07-20-2016, 09:37 AM

Are you referring to needing the Nvidia drivers only during driver installation? The system should work with standard display drivers instead.

naTe_coRe_1084

07-20-2016, 09:37 AM #2

Are you referring to needing the Nvidia drivers only during driver installation? The system should work with standard display drivers instead.

JokerFame
Senior Member

670

08-05-2016, 02:19 PM

I was frustrated and kept pressing the power button. Is the 1060 completely non-functional? Should I try restoring the 750ti? The red dots indicated something specific about the system status.

JokerFame

08-05-2016, 02:19 PM #3

I was frustrated and kept pressing the power button. Is the 1060 completely non-functional? Should I try restoring the 750ti? The red dots indicated something specific about the system status.

egeso14
Junior Member

08-07-2016, 12:46 AM

Avoid starting the PC with the 1060, instead boot it using your IGPU and go through the DDU steps again. Reset the CMOS and consider using the display port cable.

egeso14

08-07-2016, 12:46 AM #4

Avoid starting the PC with the 1060, instead boot it using your IGPU and go through the DDU steps again. Reset the CMOS and consider using the display port cable.

DDotty2
Member

223

08-07-2016, 07:39 PM

I restored the 750ti and it functions, though regrettably the 1060 is no longer operational.

DDotty2

08-07-2016, 07:39 PM #5

I restored the 750ti and it functions, though regrettably the 1060 is no longer operational.

NicolleSpacki
Member

173

08-07-2016, 07:48 PM

The 1060 is not dead, it's just been updated to the 750 version which now works properly.

NicolleSpacki

08-07-2016, 07:48 PM #6

The 1060 is not dead, it's just been updated to the 750 version which now works properly.

bongo185
Member

130

08-08-2016, 08:29 AM

It might seem like a mistake to halt a driver install midway, but it’s possible to restart it on the second GPU. Checking your setup can help confirm this.

bongo185

08-08-2016, 08:29 AM #7

It might seem like a mistake to halt a driver install midway, but it’s possible to restart it on the second GPU. Checking your setup can help confirm this.

AwesomeIce1121
Member

201

08-08-2016, 09:32 AM

I only have a single PCI slot, which is why I can't connect. But I'm almost certain it's not working. I tried again and there was no image. It spins up, but nothing appears.

AwesomeIce1121

08-08-2016, 09:32 AM #8

I only have a single PCI slot, which is why I can't connect. But I'm almost certain it's not working. I tried again and there was no image. It spins up, but nothing appears.

BrizTato
Member

08-08-2016, 04:47 PM

if it spinning up then its not dead, usally if components are dead like a motherboard they will not power on at all the driver is software based not hardware based try uninstalling all the drivers for gpus(including the 750 and 1060) with ddu. 100 percent sure this is a windows issue.

BrizTato

08-08-2016, 04:47 PM #9

_TheSpirit
Member

116

08-10-2016, 05:06 PM

#10

Following the DDU, the 1060 screen appears once more. Unfortunately, the HDMI connection is failing. Excessive motion often leads to red dots or complete image loss.

_TheSpirit

08-10-2016, 05:06 PM #10

Following the DDU, the 1060 screen appears once more. Unfortunately, the HDMI connection is failing. Excessive motion often leads to red dots or complete image loss.

Pages (2): 1 2 Next