F5F Stay Refreshed Software Operating Systems Error during startup when disconnecting from the device.

Error during startup when disconnecting from the device.

Error during startup when disconnecting from the device.

T
Tom2Sop2
Member
139
04-04-2016, 03:33 PM
#1
When I power my computer quickly, I notice it repeatedly loops in nine hours. The screen stays dark, and the fan runs at maximum speed, then slows by a quarter of its speed before returning to full speed within about a second. I suspect this might be linked to an unstable overclock despite stress tests on RAM and CPU. What actions should I take?
T
Tom2Sop2
04-04-2016, 03:33 PM #1

When I power my computer quickly, I notice it repeatedly loops in nine hours. The screen stays dark, and the fan runs at maximum speed, then slows by a quarter of its speed before returning to full speed within about a second. I suspect this might be linked to an unstable overclock despite stress tests on RAM and CPU. What actions should I take?

G
Gustavgurra03
Posting Freak
815
04-04-2016, 07:39 PM
#2
If you think the problem comes from the overclock, reduce the overclock settings and check if it resolves the issue.
G
Gustavgurra03
04-04-2016, 07:39 PM #2

If you think the problem comes from the overclock, reduce the overclock settings and check if it resolves the issue.

L
LagMeter
Member
236
04-06-2016, 02:16 PM
#3
1. It might be unstable as my gpu sometimes crashes after extended gaming loads. 2. It might be overheating.
L
LagMeter
04-06-2016, 02:16 PM #3

1. It might be unstable as my gpu sometimes crashes after extended gaming loads. 2. It might be overheating.

Z
zeroxpalace
Member
116
04-06-2016, 10:24 PM
#4
It shows no signs of overheating under a synthetic load designed to generate maximum heat; it reaches around 80°C. Ryzen's peak is likely near 95°C. From my experience, a stable but hot overclock at 4GHZ on a Ryzen 3 1200 (93°C) led me to settle at 3.9. Should I go back to the stock setting (3.1) for testing or try something higher like 3.5? Just a guess—no further changes planned.
Z
zeroxpalace
04-06-2016, 10:24 PM #4

It shows no signs of overheating under a synthetic load designed to generate maximum heat; it reaches around 80°C. Ryzen's peak is likely near 95°C. From my experience, a stable but hot overclock at 4GHZ on a Ryzen 3 1200 (93°C) led me to settle at 3.9. Should I go back to the stock setting (3.1) for testing or try something higher like 3.5? Just a guess—no further changes planned.

J
jleff59
Junior Member
45
04-07-2016, 12:22 AM
#5
3.6
J
jleff59
04-07-2016, 12:22 AM #5

3.6

R
RockerMorton
Member
187
04-17-2016, 11:25 AM
#6
This process will require some time.
R
RockerMorton
04-17-2016, 11:25 AM #6

This process will require some time.

M
mistymairu
Member
94
04-20-2016, 03:30 PM
#7
It seems the system logged an unusual restart event. This might indicate a shutdown failure, crash, or power loss. The issue could be tied to Event ID 41 at a high severity. I detected three occurrences of this message.
M
mistymairu
04-20-2016, 03:30 PM #7

It seems the system logged an unusual restart event. This might indicate a shutdown failure, crash, or power loss. The issue could be tied to Event ID 41 at a high severity. I detected three occurrences of this message.

_
_Maddy__
Member
186
04-26-2016, 03:24 AM
#8
Check the stock clocks first; if it doesn’t resolve the problem, it could be a PSU issue. I’ve faced similar concerns before, and replacing the PSU resolved it. Not 100% certain, but it seems likely.
_
_Maddy__
04-26-2016, 03:24 AM #8

Check the stock clocks first; if it doesn’t resolve the problem, it could be a PSU issue. I’ve faced similar concerns before, and replacing the PSU resolved it. Not 100% certain, but it seems likely.

S
ssheerio
Member
135
04-26-2016, 04:43 AM
#9
I checked my PSU with a multimeter two weeks ago and everything stayed within 5% even when under load. Looking at the event viewer now, it’s clear the graphics card is handling most or all of the issues. I’m not sure of exact signs yet, but I’ve noticed some symptoms, so it seems likely. The R7 240 should be replaced regardless of whether it’s faulty.
S
ssheerio
04-26-2016, 04:43 AM #9

I checked my PSU with a multimeter two weeks ago and everything stayed within 5% even when under load. Looking at the event viewer now, it’s clear the graphics card is handling most or all of the issues. I’m not sure of exact signs yet, but I’ve noticed some symptoms, so it seems likely. The R7 240 should be replaced regardless of whether it’s faulty.