Error detected with X570 TUF gaming light driver.

TorJules
Member

184

12-19-2019, 05:33 AM

Hello everyone, I just purchased the x570 motherboard with ASUS TUF Gaming Plus Wi-Fi. When installing my PC, the DRAM lights up on the board and the computer fails to start or shows no image. My setup looks like this: Motherboard – x570 ASUS TUF Gaming Wi-Fi, Processor – Ryzen 7 2700X, RAM – CMU64GX4M4C3200C16B. I moved the RAM and removed all of it, but the lights keep on. I also tried resetting the CMOS, but nothing changed. Any suggestions? Thanks!

TorJules

12-19-2019, 05:33 AM #1

undeadskelton
Junior Member

12-21-2019, 05:52 PM

Have you attempted to start with just one drive connected?

undeadskelton

12-21-2019, 05:52 PM #2

Have you attempted to start with just one drive connected?

Illusi0ns
Junior Member

12-21-2019, 07:04 PM

I tested one stick, two sticks, and zero sticks, and in every situation the LED lights up. The RAM was functioning correctly on another PC without any issues.

Illusi0ns

12-21-2019, 07:04 PM #3

I tested one stick, two sticks, and zero sticks, and in every situation the LED lights up. The RAM was functioning correctly on another PC without any issues.

yHugoBr
Junior Member

12-21-2019, 10:27 PM

Replace the CPU. Reset the CMOS once more. Test with a single stick at a time.

yHugoBr

12-21-2019, 10:27 PM #4

Replace the CPU. Reset the CMOS once more. Test with a single stick at a time.

PixelMan64
Junior Member

12-26-2019, 12:17 AM

Yes, there are sticks in slots 2 and 4.

PixelMan64

12-26-2019, 12:17 AM #5

Yes, there are sticks in slots 2 and 4.

XDKiller711
Junior Member

01-02-2020, 04:24 AM

I tried it and it functions on both the 3rd and 4th generation RAM sticks, including the first and second models. The motherboard might be the issue. The CPU pins seem fine.

XDKiller711

01-02-2020, 04:24 AM #6

I tried it and it functions on both the 3rd and 4th generation RAM sticks, including the first and second models. The motherboard might be the issue. The CPU pins seem fine.

CougillM
Member

162

01-02-2020, 09:20 AM

Updated bios ready, no further details needed.

CougillM

01-02-2020, 09:20 AM #7

Updated bios ready, no further details needed.