Error detected in hardware: WHEA-Logger. ID 17.
Error detected in hardware: WHEA-Logger. ID 17.
Consider repositioning the GPU within the PCIe lane or switching slots. A faulty connection might be responsible for both issues. Unstable links can lead to unexpected behavior.
I checked my drivers and repositioned the GPU—still stuck in place, no movement at all. The warnings keep appearing, but only right after turning on the PC now. I counted 14 warnings instead of thousands previously. It’s unclear if there’s a real problem, though it feels unusual. On the other hand, it’s important not to ignore this since it’s definitely something out of the ordinary. What about an open-box PSU? Are you looking for a used one? My current options are either out of stock or too pricey (I’m limited to around €80).
Yes, it's perfectly fine to request a fresh PSU, test it for a day, and then return without any reason. That's just my perspective. These options work well with the GPU, though for a better upgrade you might want higher-end models like Corsair for the RX5700 RTX2070 or Enermax for the RTX2080 Super Ti. Xilence Performance X 550W, Corsair TXm 550W, Enermax Revolution D.F. 650W are all solid choices.
Enermax works well with most GPUs. For your upcoming 2060S upgrade, you'll likely need about 600W. Regarding cables, it should fit standard custom power cables from cablemods, though you may want to confirm compatibility with your setup.
It's more important to consider the overall quality and performance of the power supply unit rather than just its wattage. It seems the unit features the same PCI-e connector on both sides. The standard cables are 50cm long, which should be sufficient for a top-mounted PSU.
I'll check for any offers tomorrow and honestly, finding the perfect components is tough. Reading reviews usually doesn't help much either. Every maker adds new features—like the Enermax reducing fan speeds below 70% load, which makes sense but I'm unsure if my Bequiet does the same. It's possible, but this is my first build and it's getting pretty tight... I'm not sure how to adjust it with a 50cm cable. The available cable has a duct, but it's just not enough to connect properly (and it's also 50cm long). I'm mostly satisfied with the current setup except for that cheap-looking GPU power cable. Maybe I'd need to go under the motherboard—tried that, but it didn't work.
Many premium models do, they can even stop fans when under certain stress, this is just a benefit of high efficiency—less power turns into heat inside the PSU. Looking at that unusual design suggests it might be an In-Win case? Edit: Oh, I get it, In-Win 301.
Sure thing, I understand. I need to verify if my Bequiet model supports this setup as well. The unique layout of my INWIN 301 is really important for keeping the CPU cool. It’s interesting how it works, but the cable arrangement seems a bit awkward. Most cables are excessively long, causing space issues, and the GPU cable is too short. I’d probably need something around 60-70 cm to function properly—going through the duct and then into the GPU area would make sense. I really appreciate the design; it’s solid and looks great. If I can fit enough fans inside, the cooling should be effective. Thanks for the advice, and I hope I can get a good price before choosing between Bequiet and Enermax.
I don't see anything brilliant there. The parts that react most to heat are located at the top, where heat accumulates, which explains why 99% of modern cases place PSU and HDDs at the bottom.
The key advantage lies in the fact that most cases prioritize a top exhaust for the CPU, which means the PSU can handle the same workload (ideally) and leaves minimal space at the bottom for additional components like the GPU or intake fans. This setup often provides superior cooling compared to cases lacking a top exhaust, especially for mid-range builds. My experience suggests this configuration keeps temperatures low—CPU and GPU rarely exceed 60°C—which is significantly better than what I've seen in reviews for cases with poor airflow. The only drawback seems to be cable management; more dedicated ports would have been helpful. While the overall build feels a bit too large for my preferences, reducing its size might have improved portability without sacrificing performance. For smaller builds, the price appears reasonable, but quality matters more than size. I previously owned an ATX NZXT case that was surprisingly easy to assemble, spacious yet lacking in finish and structural integrity, with noisy airflow and a broken front USB port. Now I’m glad I switched to this "bad airflow" model. PS: Cable lengths like 45cm aren’t much help, as I expected longer cables.