F5F Stay Refreshed Hardware Desktop Error code 54 indicates an unspecified memory initialization issue.

Error code 54 indicates an unspecified memory initialization issue.

Error code 54 indicates an unspecified memory initialization issue.

G
Giosflame
Junior Member
2
12-07-2019, 12:01 AM
#1
System Details: Processor AMD Ryzen 3900x Memory G.SKILL Trident Z Neo (AMD Ryzen) 32GB (2 x 16GB) RAM F4-3600C16D-32GTZNC Graphics Card MOBO ASUS ROG STRIX X570-E Gaming Power Supply 600W Operating System Windows 10 Pro 64-bit BIOS Version 1409 I recently installed a new PC last weekend using a fresh CPU, memory, and RAM. I’m facing POST issues. When trying to power on, the system freezes with error code 54 and the CPU indicator stays lit. The only successful method so far is removing one RAM slot, restarting, then reinserting it. If I disconnect the PSU or leave it off (PSU still connected), the same error persists. Any advice would be greatly appreciated!
G
Giosflame
12-07-2019, 12:01 AM #1

System Details: Processor AMD Ryzen 3900x Memory G.SKILL Trident Z Neo (AMD Ryzen) 32GB (2 x 16GB) RAM F4-3600C16D-32GTZNC Graphics Card MOBO ASUS ROG STRIX X570-E Gaming Power Supply 600W Operating System Windows 10 Pro 64-bit BIOS Version 1409 I recently installed a new PC last weekend using a fresh CPU, memory, and RAM. I’m facing POST issues. When trying to power on, the system freezes with error code 54 and the CPU indicator stays lit. The only successful method so far is removing one RAM slot, restarting, then reinserting it. If I disconnect the PSU or leave it off (PSU still connected), the same error persists. Any advice would be greatly appreciated!

C
Cornettt
Member
66
12-07-2019, 05:39 AM
#2
Reset CMOS and refresh BIOS. Verify no bent pins or faulty memory connections.
C
Cornettt
12-07-2019, 05:39 AM #2

Reset CMOS and refresh BIOS. Verify no bent pins or faulty memory connections.

B
BoxGhosts
Junior Member
26
12-21-2019, 04:53 PM
#3
Possible issue might stem from poor memory.
B
BoxGhosts
12-21-2019, 04:53 PM #3

Possible issue might stem from poor memory.

H
HeroMark17
Junior Member
6
12-23-2019, 02:16 AM
#4
Check for signs of damage or issues. If unsure, consult a professional for an accurate assessment.
H
HeroMark17
12-23-2019, 02:16 AM #4

Check for signs of damage or issues. If unsure, consult a professional for an accurate assessment.

N
nickydebreker
Junior Member
43
12-23-2019, 09:52 PM
#5
The memory issue has a few possible solutions. The simplest option is to launch the Windows 10 utility and let it perform several scans, though it may take some time. The next step would be using MemTest86, followed by testing one memory stick at a time.
N
nickydebreker
12-23-2019, 09:52 PM #5

The memory issue has a few possible solutions. The simplest option is to launch the Windows 10 utility and let it perform several scans, though it may take some time. The next step would be using MemTest86, followed by testing one memory stick at a time.

T
Terrafin3015
Member
183
12-24-2019, 05:18 PM
#6
Consider removing the CPU and repositioning it. Make sure to help the slide move when you close the clamp using your thumb or finger.
T
Terrafin3015
12-24-2019, 05:18 PM #6

Consider removing the CPU and repositioning it. Make sure to help the slide move when you close the clamp using your thumb or finger.

B
blondeminion
Senior Member
594
12-28-2019, 07:32 PM
#7
I'll give it a shot and check what happens.
B
blondeminion
12-28-2019, 07:32 PM #7

I'll give it a shot and check what happens.