Error BSOD related to RAM detected.

TheDani_PDJ
Junior Member

08-01-2018, 12:48 AM

I've encountered the "IRQL_NOT_LESS_THAN_EQUAL" error multiple times; online sources suggest it's memory-related. I disabled all overclocking, turned off EXPO, and also experienced the "Cache Manager" BSOD. A Windows Memory Diagnostic test showed "Hardware Problems Detected" around 20% in the first run. This issue seems fixable through software fixes—should I re-enable EXPO or consider replacing the RAM?

TheDani_PDJ

08-01-2018, 12:48 AM #1

jerrydog01
Senior Member

703

08-01-2018, 12:48 AM

Consider reinstalling the memory as well. Run a memory test such as testmem5 to verify there are no issues.

jerrydog01

08-01-2018, 12:48 AM #2

Consider reinstalling the memory as well. Run a memory test such as testmem5 to verify there are no issues.

Koollojoe
Posting Freak

830

08-01-2018, 12:48 AM

EXPO is inactive and these alerts suggest your RAM is failing. Although all DDR5 models come with a lifetime warranty, you can usually return it for a free replacement unless you've altered components like the heat spreaders.

Koollojoe

08-01-2018, 12:48 AM #3

Jyok
Member

144

08-01-2018, 12:48 AM

I encounter the same error frequently, especially when my wife inquires about her birthday or our anniversary.

Jyok

08-01-2018, 12:48 AM #4

I encounter the same error frequently, especially when my wife inquires about her birthday or our anniversary.

JhonERKy
Junior Member

08-01-2018, 12:48 AM

I replaced the RAM; it functioned for a short time before the same issue resurfaced repeatedly.

JhonERKy

08-01-2018, 12:48 AM #5

I replaced the RAM; it functioned for a short time before the same issue resurfaced repeatedly.

zShard
Member

194

08-01-2018, 12:48 AM

Review the remaining components, verify temperatures, and consider resetting CMOS. For LGA devices, excessive coolant pressure might cause instability.

zShard

08-01-2018, 12:48 AM #6

Review the remaining components, verify temperatures, and consider resetting CMOS. For LGA devices, excessive coolant pressure might cause instability.

libby2004
Junior Member

08-01-2018, 12:48 AM

Check the RAM or consider updating the BIOS, particularly on an AMD system. It might be dangerous because we’re unsure if the RAM will behave unexpectedly during the update…

libby2004

08-01-2018, 12:48 AM #7

Check the RAM or consider updating the BIOS, particularly on an AMD system. It might be dangerous because we’re unsure if the RAM will behave unexpectedly during the update…

KARLEISHAK
Member

197

08-01-2018, 12:48 AM

If there are problems with the hat at 2133 stock JEDEC, it could be faulty.

KARLEISHAK

08-01-2018, 12:48 AM #8

If there are problems with the hat at 2133 stock JEDEC, it could be faulty.