Enhance performance with water cooling solutions tailored to your needs.
Enhance performance with water cooling solutions tailored to your needs.
The water in my loop barely flows around and just drips into the reservoir. I don’t know why it worked before I started replacing the water. I assumed a clogged CPU block was the issue, but even after replacing it and removing it from the loop, there’s still no change. Usually the pictures are in the correct sequence so you can track the process.
Consider removing the pipe from the outlet side of your pump and test it. If flow is weak, the pump may be blocked at the end. If flow is strong, there could be obstructions in the pipes or fittings. In that scenario, it’s best to drain the system and take apart the loop to clear any debris.
Read about how to remove buildup from your water filters on the Titan Rig blog.
I tested the setup without the CPU block and GPU block, but water movement was still limited. It seems I have no choice but to fully disassemble everything and inspect each part carefully. I’ve ordered a more powerful pump, the EK-XTOP Revo Dual D5 Serial, for another purpose. If I don’t find any issues, I’ll try that one on it. Thanks for the advice and suggestions!