Encountering issues with RAM performance and speed.
Encountering issues with RAM performance and speed.
I've faced similar problems with my system running at 3600Mhz on the same motherboard. The boot process fails even with the XMP profile enabled. Anyone have insights or solutions? My setup includes an AMD Ryzen 5800x, ASRock B550, Taichi G.Skill Trident Z, and a 3600Mhz processor. Appreciate any advice!
Activate XMP settings, adjust DRAM speed to 3200mhz manually, and verify performance. If successful, assess stability and proceed with operation. 3200mhz is the CPU memory controller's maximum rated speed, offering a higher likelihood of success. GL!
Do you have additional details about your memory kit? Certain kits rely on Hynix ICs, which are often linked to problems. You might try adjusting XMP frequency and primary timings yourself and let the board initialize further to check for a boot.
Looks like it's a Hynix kit. For now @ShrimpBrime Suggestion on manually setting 3200Mhz has worked.
DRAM COMPONENTS ----------------------------------------- Manufacturer: Hynix Part Number: H5AN8G8N[C/D]JR-TFC Package: Standard Monolithic 78-ball FBGA Die Density / Count: 8 Gb / 1 die Composition: 1024Mb x8 (64Mb x8 x 16 banks) Input Clock Frequency: 1067 MHz (0,938 ns) Minimum Timing Delays: 15-15-15-36-50 Read Latencies Supported: 16T, 15T, 14T, 13T, 12T, 11T, 10T Supply Voltage: 1.20 V XMP Certified: 1802 MHz / 16-19-19-39-58 / 1.35 V XMP Extreme : Not programmed SPD Revision: 1.0 / January 2014 XMP Revision: 2.0 / December 2013 This is definitely Hynix. Just a bit disappointed about the 3200Mhz limit?
Manually train the model. Adjust the next divider and check posting. Test the process. Repeat the rinse wash if needed.