Encountering a 'Overclocking' issue during a cold boot process.
Encountering a 'Overclocking' issue during a cold boot process.
I usually suggest obtaining RAM from a recommended list since those modules have been verified with that specific motherboard and are reliable. This doesn’t guarantee compatibility with other RAM, but it reduces uncertainty.
Regarding RAM, it’s possible that some sticks may be outdated or the PSU could be failing gradually. There might also be an issue with the motherboard itself, although if other memory types function properly, the problem is likely with the RAM.
I recommend sticking to the list provided with the motherboard you mentioned:
https://us.msi.com/file/test_report/TR10_1839.pdf
As for the maximum supported RAM, the motherboard specifications state a theoretical limit of 16GB:
https://us.msi.com/Motherboard/P43TC51/Specification
However, locating compatible RAM sticks can be challenging. Any stick that works will suffice. I’d prefer a 2x4 configuration over a 4x2 setup. Test each stick individually or in combinations to identify the problematic one. If all function correctly, the issue may lie with the 4x arrangement. If power draw decreases from four to two sticks, it could point to the PSU. Alternatively, check if a specific RAM slot is faulty by testing that particular connection.
I usually suggest using ram from the recommended list because those modules have been tested with that specific mobo and are reliable. This doesn’t guarantee other rams will fit, but it reduces uncertainty.
Regarding the amount, the mobo specifications state a maximum of 16gb ram is supported technically.
You can check the details here: https://us.msi.com/Motherboard/P43TC51/Specification
However, finding compatible sticks might be challenging. If you manage to get something that works, it’s acceptable. I’d prefer a 2x4 setup over a 4x2 configuration.
Test each stick individually or in combinations to identify the problematic one. If all function properly, the issue may lie with the 4x arrangement, the PSU, or possibly a faulty slot on the mobo. In that case, try removing the power from four sticks down to two and see if it resolves the problem.
Well, since it's an older model there are no assurances, but they could potentially swap it for something similar given its lifetime warranty. You won't lose anything by giving it a try. As for the method, use this login link:
https://sso.corsair.com/idp/AuthnEngine#/authn
then submit a support ticket to customer service.
Sedivy:
It's an older model, so there are no guarantees. However, they could possibly replace it with something similar to what you currently have, thanks to its lifetime warranty. You won't lose anything by trying. As for the method, use this login:
https://sso.corsair.com/idp/AuthnEngine#/authn
then submit a support ticket to customer service.
I believe the issue involves more than 2 RAM sticks at once—when I have just 1 or 2 connected it works fine, but with 3 or 4 it sometimes triggers an error. I think the best option is to install 2x4GB RAM or update my BIOS. But updating the BIOS isn't something I'm confident about, since I've seen tutorials but still hesitate. I'm worried it might damage the motherboard if done incorrectly, and buying new RAM would be expensive. Also, I only need DDR2, which limits my choices.
Well...if it's not any individual stick as in if you put in any two sticks it works, then it's not the ram itself that's the problem. In which case it's either the motherboard (is there any particular slot it doesn't work in, or any two slots will work, as long as it's 3 or 4), or, if there is no specificity in slots that aren't working, the PSU. You can test your psu if you've got a voltmeter:
https://www.lifewire.com/how-to-manually...er-2626158
or you can take it into a repair shop for them to test the voltages and whether they're within tolerance levels for you.