EKWB l360 prefilled?
EKWB l360 prefilled?
Is this the 'coolant concentrate' referred to before, or is it different?
Using the provided bottle of coolant concentrate mixed with distilled water eliminates the need for a kill coil, as the coolant already includes all necessary protectants for your loop. The concentrate volume is 100ml, combined with 900ml of distilled water.
Make sure to thoroughly flush your radiator several times before installing it in the loop, using only distilled water—no coolant should be used at this stage. Fill the radiator, shake it, and perform a flush in a bowl to check for any remaining debris. Repeat the process with fresh distilled water until the water runs clear from the radiator.
Once ready, you can proceed with installing your loop.
This would save me about an hour or two of driving tomorrow. I have a Microcenter with EKWB solutions. If anything is included, I can use it with distilled water. Thanks for letting me know about prewashing.
This would cut my driving time by an hour or two tomorrow. I have a Microcenter with EKWB solutions; if anything is included, I can use it with distilled water first. Thanks for letting me know about prewashing. The kit you mentioned seems to match what's listed in the parts section—coolant is shown there. EK-KIT L360 (R2.0)