DriverBooster caused my computer to malfunction.
DriverBooster caused my computer to malfunction.
You’re considering a major hardware change on your PC and have encountered some challenges getting it to boot properly. It sounds like you’re trying to switch from Intel to AMD components, but the driver issues are complicating things. The software you used—Driver Booster—seems to be contributing to the problem. Since you can’t access a Windows USB installer, you might be stuck with BIOS setup only. Your motherboard is an Aorus B550, and you’re running a Ryzen 5 5600X with an Nvidia 750Ti graphics card. If you share more details about the boot screen or any error messages, it could help pinpoint the solution.
You can prepare a bootable USB drive with Windows installation, set it to start from the USB and reinstall the OS. To avoid data loss, consider entering safe mode or repair mode and removing unnecessary drivers. Press the designated key just before seeing the logo—F8 is common but other keys may work too. You can also look up instructions online such as "how to enter safe mode windows 10" or "enter repair mode windows 10." Another method is to boot from a Windows 10 USB and select repair options instead of reinstalling. You won’t need third-party tools like DriverBooster; since your hardware is new, visit the manufacturer’s website for your motherboard model and download drivers directly.
Thank you for the update. The problem is starting up from a USB drive isn’t working. Rufus created a Windows install media, but it only displays the Windows logo and nothing else. I’ve reinstalled it and changed the boot order to BIOS, yet it still doesn’t boot. I won’t be using this program again.
Restart your computer and use DEL, F2 or F10 to access BIOS settings. Set the boot drive there. If that fails, power off the PC and disconnect the SATA cable from the hard drive or remove the M.2 SSD from the motherboard. Turn on the PC again, go back to BIOS using DEL, F2 or F10, and set the boot drive to USB. Save your changes and restart, then shut it down by holding the power button for at least 4 seconds. Reconnect the SATA cable or the M.2 SSD to the motherboard. These are the steps you need to follow...you might be surprised how simple they are.
It wasn't necessary to rely on the Windows media creation tool.
I understand. Rufus works well for various tasks, yet I've consistently relied on Microsoft's built-in tools to generate bootable media for their operating systems. That’s logical.
It didn’t work today, but I’ve used Rufus before. I might test the official version on another computer, though I’m not sure it would help.
Avoid using any suggestions and directly download the necessary drivers yourself. The GPU and audio drivers can be difficult to obtain.