Does your DisplayPort cable feel loose inside your GPU?
Does your DisplayPort cable feel loose inside your GPU?
Hello everyone, after a long pause, I’ve finally shared my thoughts again. I’m still here, though not in the usual way. There’s something I need to discuss. Because I’m very tech-oriented, I wanted to check if having a slightly loose DP cable on my GPU’s DP port is problematic. I’ve had the monitor working perfectly for a month, but when I first connected the DP cable, I wasn’t sure how to remove it properly. I forced it out a bit, heard a snap sound, and then reinserted it—everything seemed fine.
During Minecraft sessions, I noticed tiny microflashes, which turned out to be caused by the cable not being fully seated in the port. Now there are no 0.1ms flashes, and everything feels normal. My main concerns are: if the cable is a bit loose inside the port, could that cause problems? And did forcing it out the first time make it wiggly more? I wasn’t sure about the locking mechanism.
Here’s what my setup looks like:
- Mobo: ASUS P5Q-E
- CPU: Intel Xeon X5460 @4 GHz
- GPU: Asus STRIX GTX 970
- RAM: OCZ DDR2-1066 8GB (with large heatsinks)
- DVD Drive: LG GH24NSD1
- Cooler: LC-Power LC-CC-120
- PSU: MSI MAG A650BN
- Storage: SAMSUNG 870 EVO, Seagate ST3250410AS, ADATA SU650
- Monitor: ASUS TUF VG249Q1R
I’m using Windows 10, with many services disabled, and for Minecraft I’m running Java 1.21.8 Fabric modded.
If your screen appears fine, don’t interfere.
Because I’m very attentive to tech,
while first linking the DP cable, I wasn’t sure how to take it out, so I pushed it out a bit. I heard a snap sound (likely when I removed it) and didn’t see any broken parts.
Regarding your note about caring for technology, being gentle with the gear is key. If the DisplayPort cable had hooks that needed pressing to remove, that could have caused damage. As before, if the display works normally, leave it alone.
Moved this discussion from the Components area to the Graphics Cards section.
I dislike those display ports due to the locking system. I often think my own is faulty or unstable.
DVI was the final type to implement locks. I enjoyed those features. VGA also had them. There are explanations for why HDMI and DP don’t, which is why they fail and you have to replace them. The locks stopped it, so why were they removed?
I use electrical tape to secure the HDMI cable on the desk, preventing it from sagging and slowly changing the port shape. The cable stays horizontal, and the tape keeps the port stable.
My Mu computers are placed on a compact nightstand table on my right, with their GPU ports aligned horizontally with the table surface. That’s convenient—I can simply secure them in place so the rest of the cable doesn’t pull down on the connecting plug.
My cable is a bit larger, but I managed to keep it upright. I gave it a gentle shake and didn't notice any loss of signal. Because DP cables don't fit completely, I think I'll secure them fully now.