F5F Stay Refreshed Hardware Desktop DOCC Asus TUF GAMING B550 Plus with Wi-Fi Wireless connectivity included for seamless streaming and gaming.

DOCC Asus TUF GAMING B550 Plus with Wi-Fi Wireless connectivity included for seamless streaming and gaming.

DOCC Asus TUF GAMING B550 Plus with Wi-Fi Wireless connectivity included for seamless streaming and gaming.

L
LucasGamer30
Junior Member
16
04-02-2020, 02:05 AM
#1
Hello,
Received the new setup for my wife: Asus TUF GAMING B550 plus, AMD Ryzen 7 3700X, 2x8GB RAM, Corsair Vengeance LPX 3200MHz, and CMK16GX4M2B3200C16.

When trying to activate DOCC with the default 3200MHz setting, the system won’t boot due to instability. I reduced the frequency to 3000MHz and set the FLC to 1500MHz, but it still didn’t work. Any suggestions for optimizing settings to fully utilize the RAM? Thanks ahead,
Best regards
L
LucasGamer30
04-02-2020, 02:05 AM #1

Hello,
Received the new setup for my wife: Asus TUF GAMING B550 plus, AMD Ryzen 7 3700X, 2x8GB RAM, Corsair Vengeance LPX 3200MHz, and CMK16GX4M2B3200C16.

When trying to activate DOCC with the default 3200MHz setting, the system won’t boot due to instability. I reduced the frequency to 3000MHz and set the FLC to 1500MHz, but it still didn’t work. Any suggestions for optimizing settings to fully utilize the RAM? Thanks ahead,
Best regards

L
LorrenK
Senior Member
703
04-02-2020, 05:43 AM
#2
I possess the non-WiFi model and managed to get it running by swapping the RAM slots and refreshing the BIOS.
L
LorrenK
04-02-2020, 05:43 AM #2

I possess the non-WiFi model and managed to get it running by swapping the RAM slots and refreshing the BIOS.

S
Stealsz
Member
126
04-11-2020, 05:45 PM
#3
I'll attempt it and keep you informed.
S
Stealsz
04-11-2020, 05:45 PM #3

I'll attempt it and keep you informed.

C
coolgamer33
Member
189
04-11-2020, 06:07 PM
#4
In reality, I accidentally left the RAM in the incorrect port. I switched it over and implemented the updated settings—everything works now. Thank you!
C
coolgamer33
04-11-2020, 06:07 PM #4

In reality, I accidentally left the RAM in the incorrect port. I switched it over and implemented the updated settings—everything works now. Thank you!