Do you need assistance with your computer?
Do you need assistance with your computer?
So, I've got a few things going on. I recently installed a 128GB RAM and a new CPU into my B550 Pro4 ASRock motherboard. The BIOS isn't fully updated, but it's updated enough to run the CPU smoothly. It seems like the BIOS is around version P3.40 or close. However, I'm facing some problems.
DIMMB1-2 doesn't function properly after swapping out my old RAM and CPU (previously a Ryzen 3). About half of the RAM is installed, but the other half isn't working at all. It's not a bad RAM, as I've tested all the modules in the two slots that are operational.
I searched for help, but didn't find a clear solution. I saw some hints about timing changes and overclocking, and that my RAM might not be sufficient. When I use a SET XMP profile, Windows responds well, except for occasional blue screens and random program crashes.
Also, because my drive isn't partitioned correctly (I set it to MBR and need GPT), I can't enable Secure Boot. Windows 11 requires Secure Boot, so I can't upgrade everything due to my 1TB drive, which I know needs to be formatted as a GPT drive. It's really confusing and frustrating. If you have any advice or tips, please let me know—I'm really not wanting to replace my whole PC. Also, I'm trying to get through Windows 11.
My motherboard supports non-overclocked RAM at 3200MHz, but I have 3600MHz.
Here are some details for reference:
ASRock B550 Pro4
AMD Ryzen 7 5700X
Four DDR4-3600 Trident Z Royal Crystal modules
RTX 3070TI (standard)
1TB solid state drive
Two 8TB hard drives
Please let me know if you need anything else!
PSU: make, model, wattage, age, condition (original to build, new, used, refurbished)?
Start with a simple setup—no over-clocking, etc.—just the boot drive without any immediate changes to Windows or extra drives.
Goal is to set up a stable system first, then focus on tweaks that improve performance.
Make small adjustments one at a time.
Review the system logs: Reliability History/Monitor and Event Viewer for error codes, warnings, and other events.
= = = ==
Consult the motherboard's User Guide/Manual.
Some boards need the first RAM slot to be DIMM_A2, though this can vary.
Occasionally the instructions are clear, sometimes hidden in fine print or subtle diagrams.
Often there are additional notes or warnings in the text and/or BIOS settings.
= = = =
Take a break, then go through the motherboard's User Guide and Manual again to confirm everything.
Do the same for all installed parts.
Verify devices are supported, drivers are current (direct from makers), and configurations are correct.
Check thoroughly.
The AMD RAM support varies based on both the motherboard and the CPU. This information is based on tested configurations. For 128GB, a 3200 MHz speed is typically the optimal setting. All four sticks from the same matched kit should be included in the same package. If not, you might encounter problems that could be difficult to fix. Once the system appears stable, perform memtest86+. It will boot from a USB drive without using Windows. You can find it at Memtest86+ | The Open-Source Memory Testing Tool (memtest.org). Some systems allow running the test directly from the BIOS tools menu. Successful completion of a full pass with no errors suggests your RAM is functioning properly. Additional passes may reveal issues but will be time-consuming. It’s generally not recommended unless you strongly suspect a memory problem.
Hopefully so! I'll try my best and look for more information.
Psu: EVGA 1000 GT supernova (used, probably bought from a friend who built this PC. I changed the RAM and CPU after purchasing from them).
Lemme double check the manuals and all that, because I noticed the 3600mhz RAM is listed, just showing 3600 (OC), so I just want to be sure it's getting the most of my investments.
Everything comes from the same source, same package, correct. That means I shouldn't be increasing the DDR4 RAM speed to 3600 in BIOS, right? Should stay at 32, and I wonder if it can run four sticks.
I’ll double-check the program, please.
That's a great motherboard you have there!
UEFI has been around since the 2010s.
It was the reason my GTX 780 wouldn't boot with my first DIY board, an ASRock A785GM-LE/128M (AM3 Socket).
Formatting for GPT isn't too important. Just ensure you choose GPT - UEFI (non CSM) when making your Windows 11 installation USB. If you're using rufus, don't miss it.