Do you know where to purchase regular ATX colored coded modular cables?
Do you know where to purchase regular ATX colored coded modular cables?
Hello I'm searching for Regular Colored ATX Modular Cables only. The regular color-coded ones are what I need. I can't find them anywhere online. They come in every other color you'd prefer, but I really need the standard cables since I plan to power a pico ATX power supply using it. It has an unusual plug—an xt60 plug. I was thinking about soldering it onto my cables, but that might be tougher if all the cables are the same color. The input amperage on the pico is 50 amps, so I have to use an ATX power supply; regular power bricks won't work at that level.
You can get custom cables from places like Cablemod. Without PSU details, I can't give specific suggestions.
You might also attach your own connectors using wires in any color you prefer if you purchase the necessary tools.
There are many non-modular units available with ketchup and mustard options.
If I were setting it up, I’d probably use colored electrical tape to mark the wires.
I searched for a Pico ATX power supply and discovered the picoPSU-160-XT model:
Next, I checked the XT60 connector and found a matching one:
If the XT60 connector supports 60A, you'd need to connect several +12V wires from an ATX PSU to satisfy the requirements of a device connected through that connector.
Lastly, I found a non-modular, color-coded ATX extension cable on Amazon:
Do any of these products match what you're looking for? Please share images and additional details.
Thank you for your response.
You're right regarding the xt60 connector.
I haven't finalized a power supply yet, but the Corsair SF600 seems suitable—it features a 50-amp, 12-volt rail.
The pico power supply's maximum input is 50 amps or 12 volts at 50 amps.
I'm not confident in the unbranded 600-watt model, but it's the only alternative I have. I'll follow up on the other choice soon.
Well, calculating 12V multiplied by 50A gives you 600W. To achieve this, you'll need to connect several yellow (+12V) and black (0V) wires in parallel. If this advice is accurate, you'd require four PCIe graphics power leads at 150W each, or a combination of two PCIe leads with one 8-way ATX12V motherboard connector.
The main point is to avoid short circuits, which could overload the ATX power supply's safety features. A standard 12V car battery can deliver three to four times more current (180 to 240A), and people often work in environments without gloves, unless they prefer a clean hand. 12V remains well below the SELV threshold.
It’s wise to wrap any solder joints with heat shrink tubing.