F5F Stay Refreshed Hardware Desktop Do you have any suggestions on why your PC shuts down during graphically demanding games (KERNAL POWER 41)?

Do you have any suggestions on why your PC shuts down during graphically demanding games (KERNAL POWER 41)?

Do you have any suggestions on why your PC shuts down during graphically demanding games (KERNAL POWER 41)?

Pages (3): 1 2 3 Next
M
MangoDruid
Member
80
09-21-2019, 04:17 AM
#1
CPU: i3-10100F
CPU cooler: ID-COOLING SE-224-XTS
Motherboard: ASUS PRIME H410M-K
Memory: 16 gb DDR4 2666mhz
Storage: 1TB HDD, 2TB HDD, 256GB SSD, 120GB SSD
GPU: RTX 2070 SUPER GIGABYTE OC
Chassis: IDK
Power supply: EVGA 750W BR
When I play graphically demanding games such as Elden Ring, my PC shuts down unexpectedly after a short while. However, switching to the GTX 1650 works without problems. Many believe my previous power supply was defective, so I replaced it with a 750W EVGA model, but the issue persists. At this stage, I’m unsure how to resolve it. Additionally, during a Furmark test, temperatures reached 80°C on the GPU and 102°C at the hotspot. Each crash logs a kernel power event.
I need assistance
🙁
M
MangoDruid
09-21-2019, 04:17 AM #1

CPU: i3-10100F
CPU cooler: ID-COOLING SE-224-XTS
Motherboard: ASUS PRIME H410M-K
Memory: 16 gb DDR4 2666mhz
Storage: 1TB HDD, 2TB HDD, 256GB SSD, 120GB SSD
GPU: RTX 2070 SUPER GIGABYTE OC
Chassis: IDK
Power supply: EVGA 750W BR
When I play graphically demanding games such as Elden Ring, my PC shuts down unexpectedly after a short while. However, switching to the GTX 1650 works without problems. Many believe my previous power supply was defective, so I replaced it with a 750W EVGA model, but the issue persists. At this stage, I’m unsure how to resolve it. Additionally, during a Furmark test, temperatures reached 80°C on the GPU and 102°C at the hotspot. Each crash logs a kernel power event.
I need assistance
🙁

M
mrpotatofail
Junior Member
11
09-21-2019, 06:13 AM
#2
Kernal Power 41 experienced an unexpected power drop after a hard reset. Reviewing the preceding events helps identify the root cause. The new power supply wasn't ideal, which might still be contributing. The wattage rating isn't the only factor to consider. The temperature of 102C suggests insufficient airflow within the case. Without at least two unobstructed fans for intake and one for exhaust, the system could be overheating. Consider removing the side panel. Another option is to limit GPU power consumption, as even small reductions can prevent overheating while keeping performance stable.
M
mrpotatofail
09-21-2019, 06:13 AM #2

Kernal Power 41 experienced an unexpected power drop after a hard reset. Reviewing the preceding events helps identify the root cause. The new power supply wasn't ideal, which might still be contributing. The wattage rating isn't the only factor to consider. The temperature of 102C suggests insufficient airflow within the case. Without at least two unobstructed fans for intake and one for exhaust, the system could be overheating. Consider removing the side panel. Another option is to limit GPU power consumption, as even small reductions can prevent overheating while keeping performance stable.

I
irvinIRS
Member
64
09-22-2019, 07:56 PM
#3
I have three fans at the front and one at the back all working in the same direction.
With a limited budget, I didn't want to spend too much, but it was ranked C on the PSU tier list.
Also, I'm wondering how to set a temperature limit.
I
irvinIRS
09-22-2019, 07:56 PM #3

I have three fans at the front and one at the back all working in the same direction.
With a limited budget, I didn't want to spend too much, but it was ranked C on the PSU tier list.
Also, I'm wondering how to set a temperature limit.

I
IkBenHetBram
Senior Member
735
09-22-2019, 10:15 PM
#4
MSI Afterburner is typically the preferred software. Power and/or temperature thresholds can be adjusted. Voltage settings are also possible. For example, I use a 350W GPU with a 280W limit and still achieve most of the results. (My case isn’t ideal since temperature isn’t a factor, it’s water cooled) However, air users have also modified voltage and power limits to boost performance at lower power. This depends on how the silicon performs under low voltage. Regarding the PSU, if you’re using a high-end GPU, you definitely need a reliable power supply. It’s possible the overheating is the real problem, and there are no sensors to detect it. Lowering the GPU load might help in that situation.
I
IkBenHetBram
09-22-2019, 10:15 PM #4

MSI Afterburner is typically the preferred software. Power and/or temperature thresholds can be adjusted. Voltage settings are also possible. For example, I use a 350W GPU with a 280W limit and still achieve most of the results. (My case isn’t ideal since temperature isn’t a factor, it’s water cooled) However, air users have also modified voltage and power limits to boost performance at lower power. This depends on how the silicon performs under low voltage. Regarding the PSU, if you’re using a high-end GPU, you definitely need a reliable power supply. It’s possible the overheating is the real problem, and there are no sensors to detect it. Lowering the GPU load might help in that situation.

I
IAMLeonox
Member
163
09-26-2019, 02:19 PM
#5
Yes, it could be related to my PSU I haven't considered before, but I don't see any cause for it to overheat. Another point that came to mind is my specific GPU model has three fans, each with its own heat sink; the one near the ports is slightly bent down by 3 cm. The fan under it spins fine, but could this be a problem? Should I think about reapplying thermal pads and paste? Also, I forgot that this card was purchased used.
I
IAMLeonox
09-26-2019, 02:19 PM #5

Yes, it could be related to my PSU I haven't considered before, but I don't see any cause for it to overheat. Another point that came to mind is my specific GPU model has three fans, each with its own heat sink; the one near the ports is slightly bent down by 3 cm. The fan under it spins fine, but could this be a problem? Should I think about reapplying thermal pads and paste? Also, I forgot that this card was purchased used.

P
Peinnoob
Member
52
09-26-2019, 08:36 PM
#6
I suggest you update your BIOS right away and then perform a retest. Please do this initially, before giving any response. Additionally, could you clarify the exact issue? Is it a system restart, shutdown, or a blue screen of death?
P
Peinnoob
09-26-2019, 08:36 PM #6

I suggest you update your BIOS right away and then perform a retest. Please do this initially, before giving any response. Additionally, could you clarify the exact issue? Is it a system restart, shutdown, or a blue screen of death?

G
GameBoosh
Senior Member
470
10-02-2019, 01:49 PM
#7
I've already refreshed my bios to the newest release.
My computer suddenly powers off without warning, fans stop, the monitor turns black, but with the USB Bluetooth dongle connected and the LED still lit, power remains supplied via case. After about five minutes it restarts and prompts me to go to bios or something, XMP is disabled and I have to turn it back on each time it shuts down.
G
GameBoosh
10-02-2019, 01:49 PM #7

I've already refreshed my bios to the newest release.
My computer suddenly powers off without warning, fans stop, the monitor turns black, but with the USB Bluetooth dongle connected and the LED still lit, power remains supplied via case. After about five minutes it restarts and prompts me to go to bios or something, XMP is disabled and I have to turn it back on each time it shuts down.

S
SirKumsishon
Senior Member
257
10-02-2019, 02:40 PM
#8
Can you show a photo of your system with side panel removed?
(upload to imgur.com and post link)
Does your pc case have mesh front or closed front (acrylic/glass/whatever)?
S
SirKumsishon
10-02-2019, 02:40 PM #8

Can you show a photo of your system with side panel removed?
(upload to imgur.com and post link)
Does your pc case have mesh front or closed front (acrylic/glass/whatever)?

W
wam203
Junior Member
30
10-03-2019, 06:09 PM
#9
Also, during the troubleshooting phase, consider ordering a replacement motherboard battery. The issue with XMP disabling repeatedly is concerning, especially since the motherboard was recently available in August 2020.

Duracell CR2032 3V Lithium Battery
$4.55
(please apply a 25% discount digital coupon)
https://www.amazon.com/gp/product/B07GN8ZYZR/
Addendum
: It would be wise to contact Asus as well, since the motherboard might qualify for a standard three-year warranty; TUF models offer five years.
W
wam203
10-03-2019, 06:09 PM #9

Also, during the troubleshooting phase, consider ordering a replacement motherboard battery. The issue with XMP disabling repeatedly is concerning, especially since the motherboard was recently available in August 2020.

Duracell CR2032 3V Lithium Battery
$4.55
(please apply a 25% discount digital coupon)
https://www.amazon.com/gp/product/B07GN8ZYZR/
Addendum
: It would be wise to contact Asus as well, since the motherboard might qualify for a standard three-year warranty; TUF models offer five years.

G
Godslayerno1
Member
54
10-09-2019, 12:44 AM
#10
See the view from both sides, including the bent GPU sink. The model features a mesh front.
G
Godslayerno1
10-09-2019, 12:44 AM #10

See the view from both sides, including the bent GPU sink. The model features a mesh front.

Pages (3): 1 2 3 Next