F5F Stay Refreshed Hardware Desktop Disposition pour 5800x3D

Disposition pour 5800x3D

Disposition pour 5800x3D

Pages (2): 1 2 Next
F
Fabista
Member
175
06-16-2022, 11:44 AM
#1
It seems the temperatures you mentioned aren't typical for that setup. The 5800x3D runs best between 40-50°C, but its highest recorded was 84°C. You haven’t played any games yet and haven’t had much time to test it.
F
Fabista
06-16-2022, 11:44 AM #1

It seems the temperatures you mentioned aren't typical for that setup. The 5800x3D runs best between 40-50°C, but its highest recorded was 84°C. You haven’t played any games yet and haven’t had much time to test it.

W
WF_Catt
Posting Freak
761
06-17-2022, 02:43 PM
#2
My experience has been smooth. Cinebench feels like a 'poor fit,' and it's unlikely you'll hit 84c while playing normally, even though that speed is still okay.
W
WF_Catt
06-17-2022, 02:43 PM #2

My experience has been smooth. Cinebench feels like a 'poor fit,' and it's unlikely you'll hit 84c while playing normally, even though that speed is still okay.

U
UsagiK
Junior Member
49
06-19-2022, 01:20 AM
#3
It varies with the cooler you choose; the temperature stays similar during my runs. Idle temps are in the low 40s to 50s, while the Cinebench 82C reaches about 82°C. I only use an Evo Air cooler.
U
UsagiK
06-19-2022, 01:20 AM #3

It varies with the cooler you choose; the temperature stays similar during my runs. Idle temps are in the low 40s to 50s, while the Cinebench 82C reaches about 82°C. I only use an Evo Air cooler.

O
OTRUUU21
Member
58
06-19-2022, 05:18 AM
#4
Sure, I noticed something might be off. I was told on the forum it's too heavy for my CPU, but I'm not sure what to do.
O
OTRUUU21
06-19-2022, 05:18 AM #4

Sure, I noticed something might be off. I was told on the forum it's too heavy for my CPU, but I'm not sure what to do.

O
o_OEvo
Member
160
06-24-2022, 05:12 PM
#5
You checked the expected temperatures for the 360 AIO and confirmed the typical CPU ranges. You also verified the normal temperature values beforehand.
O
o_OEvo
06-24-2022, 05:12 PM #5

You checked the expected temperatures for the 360 AIO and confirmed the typical CPU ranges. You also verified the normal temperature values beforehand.

F
FireBoy1991
Junior Member
8
06-25-2022, 01:25 AM
#6
My performance following the R23 session.
F
FireBoy1991
06-25-2022, 01:25 AM #6

My performance following the R23 session.

T
twentyonechloe
Member
235
06-27-2022, 03:45 PM
#7
The additional cache layer complicates heat dissipation, which is why manual voltage and clock adjustments are turned off in the BIOS. On certain motherboards you can set a negative PBO voltage value, and using high-quality thermal paste helped reduce temperatures by a few degrees in Cinebench. You might want to verify if your board supports this, though the effect would likely be only a couple of degrees. It can also provide a slight increase in game frequency.
T
twentyonechloe
06-27-2022, 03:45 PM #7

The additional cache layer complicates heat dissipation, which is why manual voltage and clock adjustments are turned off in the BIOS. On certain motherboards you can set a negative PBO voltage value, and using high-quality thermal paste helped reduce temperatures by a few degrees in Cinebench. You might want to verify if your board supports this, though the effect would likely be only a couple of degrees. It can also provide a slight increase in game frequency.

H
HeteBom
Member
146
06-27-2022, 03:59 PM
#8
I just demonstrated a 20 cent variation.
H
HeteBom
06-27-2022, 03:59 PM #8

I just demonstrated a 20 cent variation.

T
TheFin987
Junior Member
13
06-28-2022, 04:03 AM
#9
I’d hope for a bit more from that unit, but it’s giving me the same readings as my basic 212 Evo. Just try reapplying with quality paste and reseating the block.
T
TheFin987
06-28-2022, 04:03 AM #9

I’d hope for a bit more from that unit, but it’s giving me the same readings as my basic 212 Evo. Just try reapplying with quality paste and reseating the block.

B
bengalwatcher
Posting Freak
801
06-28-2022, 08:20 AM
#10
I just noticed that too—I was typing when I saw the update alert... lol, honestly, such a high temperature matching my EVO’s should only happen if he’s running Cinebench for a long time, letting the water fully circulate.
B
bengalwatcher
06-28-2022, 08:20 AM #10

I just noticed that too—I was typing when I saw the update alert... lol, honestly, such a high temperature matching my EVO’s should only happen if he’s running Cinebench for a long time, letting the water fully circulate.

Pages (2): 1 2 Next