F5F Stay Refreshed Hardware Desktop Displays failing to power on after boot sequence.

Displays failing to power on after boot sequence.

Displays failing to power on after boot sequence.

A
AlexDDos
Member
57
10-17-2022, 02:57 PM
#1
Hi Everyone, I'm trying to figure out what's going on with my setup. I've been researching this for a while but still can't find a solution—it's really frustrating. A few months back, I bought two 32" Dell monitors (one G3223Q and one G3223D). Initially, they didn’t boot with my PC; it took at least ten minutes to restart and reconnect cables before showing the AORUS logo and starting up. I’ve never had any issues connecting them to other monitors or TVs before.

PC specs: GIGABYTE X570 AORUS PRO, AMD RYZEN 9 5950X, 32GB DDR4, NVIDIA 3080 TI EAGLE. Both monitors are connected via DP to the GPU, and I've tried HDMI too without success—changed cables and drivers. I updated BIOS, graphics, monitor drivers, installed Dell Display Manager, and applied NVIDIA DP Firmware updates, but nothing changed. I even read about enabling/disabling CSM, but that didn’t help either.

I’m not sure what’s causing this and would really appreciate any advice or fixes you can suggest. Thanks a lot!
A
AlexDDos
10-17-2022, 02:57 PM #1

Hi Everyone, I'm trying to figure out what's going on with my setup. I've been researching this for a while but still can't find a solution—it's really frustrating. A few months back, I bought two 32" Dell monitors (one G3223Q and one G3223D). Initially, they didn’t boot with my PC; it took at least ten minutes to restart and reconnect cables before showing the AORUS logo and starting up. I’ve never had any issues connecting them to other monitors or TVs before.

PC specs: GIGABYTE X570 AORUS PRO, AMD RYZEN 9 5950X, 32GB DDR4, NVIDIA 3080 TI EAGLE. Both monitors are connected via DP to the GPU, and I've tried HDMI too without success—changed cables and drivers. I updated BIOS, graphics, monitor drivers, installed Dell Display Manager, and applied NVIDIA DP Firmware updates, but nothing changed. I even read about enabling/disabling CSM, but that didn’t help either.

I’m not sure what’s causing this and would really appreciate any advice or fixes you can suggest. Thanks a lot!

G
GoSens87
Member
103
10-17-2022, 02:57 PM
#2
I would access the monitor settings directly and turn off any energy-saving options.
G
GoSens87
10-17-2022, 02:57 PM #2

I would access the monitor settings directly and turn off any energy-saving options.

P
Power_house101
Member
78
10-17-2022, 02:57 PM
#3
Thanks for the suggestion. I attempted it but didn’t notice any changes.
P
Power_house101
10-17-2022, 02:57 PM #3

Thanks for the suggestion. I attempted it but didn’t notice any changes.