F5F Stay Refreshed Hardware Desktop Display PC screens using green lines for visualization.

Display PC screens using green lines for visualization.

Display PC screens using green lines for visualization.

Pages (2): 1 2 Next
D
DerpGuy55
Junior Member
19
04-15-2022, 05:14 PM
#1
I assembled my first PC and everything proceeded smoothly. I completed a pre-build test and shared it online. After finishing the build, it still posted correctly. However, suddenly the screen began showing corrupted signals when I tried to boot back into BIOS after turning off the PC. Windows hadn't been installed yet. Someone can assist me? I'll also attach a photo below.
D
DerpGuy55
04-15-2022, 05:14 PM #1

I assembled my first PC and everything proceeded smoothly. I completed a pre-build test and shared it online. After finishing the build, it still posted correctly. However, suddenly the screen began showing corrupted signals when I tried to boot back into BIOS after turning off the PC. Windows hadn't been installed yet. Someone can assist me? I'll also attach a photo below.

S
skyfall1235
Junior Member
30
05-03-2022, 10:14 PM
#2
Yes, the GPU should be firmly placed in the slot.
S
skyfall1235
05-03-2022, 10:14 PM #2

Yes, the GPU should be firmly placed in the slot.

1
1zambos
Member
188
05-05-2022, 07:58 AM
#3
I'll reposition it for accuracy.
1
1zambos
05-05-2022, 07:58 AM #3

I'll reposition it for accuracy.

E
EPIC_GT
Member
219
05-05-2022, 04:42 PM
#4
Verify the cables are securely attached to both the GPU and monitor. If you have an extra cable, test it to confirm it’s not faulty.
E
EPIC_GT
05-05-2022, 04:42 PM #4

Verify the cables are securely attached to both the GPU and monitor. If you have an extra cable, test it to confirm it’s not faulty.

M
mat350
Junior Member
19
05-05-2022, 10:54 PM
#5
All connections are tightly locked in place. This setup is completely new and looks quite unusual.
M
mat350
05-05-2022, 10:54 PM #5

All connections are tightly locked in place. This setup is completely new and looks quite unusual.

D
DarckMoule
Member
160
05-07-2022, 08:42 PM
#6
There was an issue with the cable not being fully connected.
D
DarckMoule
05-07-2022, 08:42 PM #6

There was an issue with the cable not being fully connected.

D
dpbigbear10
Member
162
05-08-2022, 09:38 AM
#7
This solution didn't resolve the issue.
D
dpbigbear10
05-08-2022, 09:38 AM #7

This solution didn't resolve the issue.

U
uilen
Junior Member
16
05-08-2022, 10:03 AM
#8
I've noticed artifacting when overclocking VRAM and faulty GPUs, but never experienced this with a cable connected incorrectly. It's quite unusual.
U
uilen
05-08-2022, 10:03 AM #8

I've noticed artifacting when overclocking VRAM and faulty GPUs, but never experienced this with a cable connected incorrectly. It's quite unusual.

X
Xboxboy452
Junior Member
5
05-08-2022, 11:53 AM
#9
Yes, I've experimented with various cables.
X
Xboxboy452
05-08-2022, 11:53 AM #9

Yes, I've experimented with various cables.

D
Da_Shadows
Member
185
05-10-2022, 04:55 AM
#10
Everything looks fine so I think that I'll need to go buy a new video cable that can also explain why it sometimes works aswell. Thanks for the help guys I'll keep you posted on the issue
D
Da_Shadows
05-10-2022, 04:55 AM #10

Everything looks fine so I think that I'll need to go buy a new video cable that can also explain why it sometimes works aswell. Thanks for the help guys I'll keep you posted on the issue

Pages (2): 1 2 Next