F5F Stay Refreshed Hardware Desktop Display issue with NVME M.2 SSD

Display issue with NVME M.2 SSD

Display issue with NVME M.2 SSD

X
xBlqndy_
Junior Member
34
10-27-2021, 03:59 PM
#1
You've just assembled your first PC and are trying to set up Windows 11, but the NVMe SSD you installed isn't appearing. Since it's a MSI motherboard, let's check the BIOS settings and ensure the drive is properly recognized.
X
xBlqndy_
10-27-2021, 03:59 PM #1

You've just assembled your first PC and are trying to set up Windows 11, but the NVMe SSD you installed isn't appearing. Since it's a MSI motherboard, let's check the BIOS settings and ensure the drive is properly recognized.

V
Ventium
Junior Member
25
10-28-2021, 04:05 PM
#2
V
Ventium
10-28-2021, 04:05 PM #2

C
Configurations
Member
233
11-01-2021, 09:50 PM
#3
What model SSD and Motherboard do you have and which slot is the SSD in?
C
Configurations
11-01-2021, 09:50 PM #3

What model SSD and Motherboard do you have and which slot is the SSD in?

D
Der_HauiHD
Member
144
11-18-2021, 10:36 PM
#4
TeamGroup MP33 1 TB M.2-2280 NVMe SSD paired with MSI MAG B660 ATX motherboard featuring LGA1700 socket, i5-12600K processor, ASUS TUF RTX 3080 OC edition. Designed for optimal performance on a 1st SSD slot.
D
Der_HauiHD
11-18-2021, 10:36 PM #4

TeamGroup MP33 1 TB M.2-2280 NVMe SSD paired with MSI MAG B660 ATX motherboard featuring LGA1700 socket, i5-12600K processor, ASUS TUF RTX 3080 OC edition. Designed for optimal performance on a 1st SSD slot.

T
TomHD_v3
Member
54
11-19-2021, 05:08 AM
#5
T
TomHD_v3
11-19-2021, 05:08 AM #5

X
xGexa
Member
75
11-21-2021, 05:44 AM
#6
I encountered problems with my initial NVME and realized it wasn’t properly seated. If you’re new to this, simply insert it at a 45-degree angle and apply firm pressure—it should slide in. You might need to gently rock it side to side. Good luck!
X
xGexa
11-21-2021, 05:44 AM #6

I encountered problems with my initial NVME and realized it wasn’t properly seated. If you’re new to this, simply insert it at a 45-degree angle and apply firm pressure—it should slide in. You might need to gently rock it side to side. Good luck!