F5F Stay Refreshed Hardware Desktop Discussion about CPU lanes

Discussion about CPU lanes

Discussion about CPU lanes

X
xX__IaMmE__Xx
Junior Member
7
08-01-2018, 08:56 AM
#1
Hi everyone, I'm having some confusion about CPU lane usage with my setup. I have an Asus TUF Z390 Plus motherboard running an Intel i9 9900K with two NVMe SSDs in two M.2 slots and a GeForce GTX 1070 Ti installed in the PCIe x16 slot. My main concern is whether the NVMe drives will use CPU lanes. I've set up my graphics card in one of the 16x slots, but the CPU only supports a maximum of 16 lanes. Can you clarify this?
X
xX__IaMmE__Xx
08-01-2018, 08:56 AM #1

Hi everyone, I'm having some confusion about CPU lane usage with my setup. I have an Asus TUF Z390 Plus motherboard running an Intel i9 9900K with two NVMe SSDs in two M.2 slots and a GeForce GTX 1070 Ti installed in the PCIe x16 slot. My main concern is whether the NVMe drives will use CPU lanes. I've set up my graphics card in one of the 16x slots, but the CPU only supports a maximum of 16 lanes. Can you clarify this?

A
AwsomeGamer79
Member
137
08-01-2018, 09:40 AM
#2
SSDs rely on chipset lanes for data transfer. This approach has remained consistent across Intel's consumer devices using M.2 slots.
A
AwsomeGamer79
08-01-2018, 09:40 AM #2

SSDs rely on chipset lanes for data transfer. This approach has remained consistent across Intel's consumer devices using M.2 slots.

A
ArceusHD
Member
154
08-14-2018, 01:30 PM
#3
If uncertain, verify your BIOS configuration. However, if no M.2 option appears, it defaults to using chipset lanes. In your scenario, it seems chipset lanes are active—specifically, up to 24 lanes on Z390, with x1, x2, and x4 available. This should assist you.
A
ArceusHD
08-14-2018, 01:30 PM #3

If uncertain, verify your BIOS configuration. However, if no M.2 option appears, it defaults to using chipset lanes. In your scenario, it seems chipset lanes are active—specifically, up to 24 lanes on Z390, with x1, x2, and x4 available. This should assist you.

H
Hiduok
Member
65
08-16-2018, 03:46 AM
#4
He lacks a DIMM.2 port on his board, leaving no alternative besides reducing performance to Gen 2 levels.
H
Hiduok
08-16-2018, 03:46 AM #4

He lacks a DIMM.2 port on his board, leaving no alternative besides reducing performance to Gen 2 levels.

T
timo_1892
Senior Member
715
08-19-2018, 04:06 PM
#5
Thanks! Let's proceed.
T
timo_1892
08-19-2018, 04:06 PM #5

Thanks! Let's proceed.

S
sarahmc7
Junior Member
1
08-20-2018, 05:41 PM
#6
Thanks a lot everyone!
S
sarahmc7
08-20-2018, 05:41 PM #6

Thanks a lot everyone!