F5F Stay Refreshed Hardware Desktop Discussing Ryzen overclocking techniques and best practices.

Discussing Ryzen overclocking techniques and best practices.

Discussing Ryzen overclocking techniques and best practices.

O
Olliesimpo
Member
Find
65
04-16-2019, 11:56 AM
#1
I configured the RAM voltage to 1.35V or 1.4V, speed at 3600MHz, and SOC at 1.1V. After rebooting, a missing file error appeared during Windows recovery. You need to ensure the correct RAM is installed and properly seated. Also verify the BIOS settings match your configuration. If issues persist, consider checking the RAM module connections or consulting a professional.
Reply
Reply
O
Olliesimpo
04-16-2019, 11:56 AM #1

I configured the RAM voltage to 1.35V or 1.4V, speed at 3600MHz, and SOC at 1.1V. After rebooting, a missing file error appeared during Windows recovery. You need to ensure the correct RAM is installed and properly seated. Also verify the BIOS settings match your configuration. If issues persist, consider checking the RAM module connections or consulting a professional.

Reply
Reply
T
TrueBit
Senior Member
Find
590
04-23-2019, 11:08 AM
#2
Try running the setup at manual 3200mhz with XMP enabled. Check for stability. If it works, consider testing higher frequencies like 3266 or 3300mhz. Verify performance and repeat the process. The default voltage of 1.35v is acceptable.
Reply
Reply
T
TrueBit
04-23-2019, 11:08 AM #2

Try running the setup at manual 3200mhz with XMP enabled. Check for stability. If it works, consider testing higher frequencies like 3266 or 3300mhz. Verify performance and repeat the process. The default voltage of 1.35v is acceptable.

Reply
Reply