Discussing memory related queries
Discussing memory related queries
You're questioning how memory upgrades work with your current setup. The issue likely stems from the DIMM slots being rearranged. Moving the original DIMMs to a different bank (1/2) keeps them paired, while the new ones go to another bank (3/4). This maintains dual-channel support and preserves XMP profiles. Your manual seems correct, but double-check the slot configuration to ensure compatibility with your motherboard.
Place the DIMMs in groups within the same bank for consistency.
Here’s a clearer explanation of your question:
You’re trying to understand how memory banks work on your motherboard. Your manual says DIMM bank A uses slots 1 and 2, while bank B uses slots 3 and 4. Keeping one kit in slot 2/4 splits the slots into two different banks, which allows dual-channel memory operation. When you add a second kit, it goes into slot 1/3, meaning it joins the original kit in slot 2/4. This setup means Bank A ends up with one DIMM from the first kit and one from the new one.
Your idea is that keeping kits in the same bank would yield better performance because each bank has a slightly different chip design (silicon variation). This variation can improve speed or stability. Your reasoning makes sense if you’re aiming for optimal results, even though it might seem complex at first.
A matched set of memory modules is often arranged in the first bank of each channel, while a separate capacity pair is placed in the second bank. This is the setup I’m referring to. The first bank occupies half of my motherboard, and the second bank takes up three-quarters. What I need to clarify is what was just mentioned.