F5F Stay Refreshed Hardware Desktop Discuss initial issues with ITX machine build

Discuss initial issues with ITX machine build

Discuss initial issues with ITX machine build

M
MannINMJ
Member
Find
105
02-25-2020, 09:31 PM
#1
Start with the basics and ensure everything is connected properly. The LED on the motherboard is blinking, which is normal. I’ve connected the monitor to both the graphics card and the built-in graphics, but nothing works. I’ve also tried using memory from another PC, cleaned out the processor, applied thermal paste, and double-checked all connections. The graphics card is back in place. I’m worried about the motherboard failing. I have the specs listed: Asus ROG Strix Z490 ITX, i5-10600K, cooler, Noctua NH-U12s RAM, G.Skill Trident 16GB (2x8GB) at 3600MHz, an ASRock 5700XT GPU, Corsair SF600 power supply, and a BIOS flash button. I’m considering updating the BIOS to see if that resolves the issue. Honestly, I’m not confident in handling this part.
Reply
Reply
M
MannINMJ
02-25-2020, 09:31 PM #1

Start with the basics and ensure everything is connected properly. The LED on the motherboard is blinking, which is normal. I’ve connected the monitor to both the graphics card and the built-in graphics, but nothing works. I’ve also tried using memory from another PC, cleaned out the processor, applied thermal paste, and double-checked all connections. The graphics card is back in place. I’m worried about the motherboard failing. I have the specs listed: Asus ROG Strix Z490 ITX, i5-10600K, cooler, Noctua NH-U12s RAM, G.Skill Trident 16GB (2x8GB) at 3600MHz, an ASRock 5700XT GPU, Corsair SF600 power supply, and a BIOS flash button. I’m considering updating the BIOS to see if that resolves the issue. Honestly, I’m not confident in handling this part.

Reply
Reply