Discover the key components to focus on for your next "What parts do I buy" article!
Discover the key components to focus on for your next "What parts do I buy" article!
Here’s the rewritten version at the same length and structure:
I hope this forum is suitable for this discussion.
It's been quite some time since I assembled my previous computer. Back then, my quad-core processor, 8GB of RAM, and 4GB GPU were top-notch. Nowadays, there are far more component options than my mind can process!
So, here’s what I’m aiming for and how I’ve been planning it. I depend a lot on user reviews and my personal experience. I’ve used Asus motherboards and Intel CPUs for years and trust them completely—so I don’t see any need to switch unless I’m convinced otherwise. Yes, I’ve also used AMD CPUs before without major problems, though I did encounter some compatibility challenges. The Intel ones seem to perform better overall, especially in other aspects. Overall, it seems the Intel chips are simply... well… superior (at least my opinion).
I’m aware there’s a strong debate between the two brands, which has been ongoing since their launch.
Others may suggest choosing a K processor instead of KF, mainly for better integrated graphics support.
Would you like to skip using spinning hard drives altogether?
Should I compare the G Skill Ripjaws RAM or the G Skill Trident (with RGB options)?
Do you have any preferences or concerns about liquid cooling systems?
If your main interest lies in gaming and your finances support it, the AMD 7800X3D is likely the ideal choice. Investigate options from Lian-Li, Corsair, Phanteks, and Antec for cases; there are numerous excellent products available. For RAM, aim for at least DDR5-6000, and G.Skill is usually a better option than Corsair. A 32GB capacity is sufficient, though increasing it can be beneficial. Also, check your monitor’s resolution and refresh rate, as well as your current frame rates and graphics preferences.
Thanks for the helpful and prompt answers! I'm not holding back on any ideas.
I'm not shying away from 'spinning hard drives'. In fact, I still have several that function very well. Some SATA, some older EIDE. If needed, I'll stick to my SATA drives from my old setup for storage purposes only, so I'm not overly worried about their slower performance. My main drives, however, should be as fast as possible.
I've noticed most motherboards nowadays include several slots for SSDs, so I thought I might add a few more of those too. The only SSD I currently own is on my laptop (and also on an external drive at Xbox), and it performs incredibly well compared to the slower systems I used to build. Back then, SSDs were cutting-edge technology. I had no idea just how fast they could go. I keep my operating system on the SSD and everything else on SATA. Boot times are almost instant. It's hard to imagine what an all-SSD configuration would be like!
Regarding AMD versus Intel... as I mentioned, I'm not giving AMD a full pass—it's just been a long time since I've used one. Even back then they were pretty new (remember the old Thunderbird chips?)... well, that was a lot of time ago. I know they've improved a lot since then.
I'm also looking for a new monitor. Right now I'm using my old PC on a 50" LCD TV. It's not the most visually appealing setup, but it works. Black Friday is approaching, so hopefully I'll be able to get a decent 4K model. Monitoring is also a big decision with so many options.
Thanks for all the great information! This is exactly what I was hoping to hear from everyone! I'm completely out of the PC building cycle now! You can definitely teach this old system some new tricks!
Coolers possess a specific height. Cases exhibit a particular width. CPUs within your desired price range benefit from enhanced cooling performance, suggesting the need for coolers with a height of 155 mm or more. Seek out cases that meet this minimum cooler height requirement. Adjustments may be made later, but compatibility between cases and coolers in this aspect is essential.
The motherboard you're considering should have a minimum of 2 M.2 slots, ideally three or four for future upgrades, though these can become costly. You might need to use inexpensive risers to increase capacity since ATX systems usually include free PCIe lanes. Eliminate hard drives altogether—you'll wish you hadn't. Spinning rust is no longer a concern now.
Regarding the monitor, you're planning for a 4K display with HDR. I'm a strong supporter of OLED technology. Be cautious to prevent burn-in, but modern models have improved significantly. I've been using a 65-inch OLED as my primary screen for years without any problems. There should also be good Black Friday promotions on the horizon.
When it comes to graphics cards, modern AMD is quite different from the Thunderbird era. It's highly recommended to go with the 7800X3D. The choice between AMD and Nvidia will mainly depend on your objectives, desired resolution, and budget.
I don’t think you’ll find anyone playing Starfield at 4K within a $1500 budget.
The 120mm fan is built into the rear of the case as an exhaust solution. Also, you’re planning to run Windows 11 with Intel 12th or 13th generation processors.
PCPartPicker Part List
CPU:
*Intel Core i7-13700F 2.1 GHz 16-Core Processor
($359.99 @ Amazon)
CPU Cooler:
*Deepcool AG620 67.88 CFM CPU Cooler
($49.99 @ Amazon)
Motherboard:
*MSI B760 GAMING PLUS WIFI ATX LGA1700 Motherboard
($159.99 @ Amazon)
Memory:
*G.Skill Ripjaws S5 32 GB (2 x 16 GB) DDR5-6000 CL32 Memory
($99.99 @ Newegg)
Storage:
*Crucial P5 Plus 2 TB M.2-2280 PCIe 4.0 X4 NVME SSD
($104.99 @ Amazon)
Video Card:
*Sapphire 21330-01-20G Radeon RX 7800 XT 16 GB Video Card
($499.99 @ Newegg)
Case:
*Fractal Design Focus 2 ATX Mid Tower Case
($79.98 @ Newegg)
Power Supply:
*MSI MAG A750GL PCIE5 750 W 80+ Gold Certified Fully Modular ATX
($89.99 @ Newegg)
Case Fan:
*ARCTIC P12 56.3 CFM 120 mm Fan
($9.99 @ Amazon)
Total: $1454.90
Includes shipping, taxes, and applicable discounts
*Selected parts based on predefined criteria*
Generated by
PCPartPicker
2023-10-22 01:35 EDT-0400
A closer inspection of these items is recommended.
https://www.msi.com/Motherboard/B760-GAMING-PLUS-WIFI
https://www.intel.com/content/www/u...-3...tions.html
https://www.deepcool.com/products/C...al...5900.shtml
https://www.gskill.com/product/165/377/1...16GA2-RS5K
https://www.crucial.com/products/ssd/cru...5-plus-ssd
https://www.sapphiretech.com/en/consumer...-16g-gddr6
https://www.msi.com/Power-Supply/MAG-A750GL-PCIE5
https://www.fractal-design.com/products/...ack-solid/
For more details, see the linked pages.
View: https://www.youtube.com/watch?v=tIG4vFQbDn4
i still love my 7800x3d
7700non is easier to cool and performs well overall
b650e mobo with decent VRM's and at least gen 5 pcie x16 for future GPU's
7900xt or 7800xt for its 20gb and 16gb Vram, the 4060 16 is not recommended due to bus speed issues in the ARC 770 16gb
i think the 4070 16 is worth considering if it’s priced right – it could be a great pick!
look into the starfield promotion on AMD products where you can get starfield for free
gskill cl30 6000 32gb ram is ideal for AMD and is currently priced well
arctic freezer ii 280mm AIO (not the most stylish but affordable and effective) keeps the system running smoothly – my friend’s build with a 60c all-core R23 was perfect
i prefer my samsung pro 980s, wd sn850x 2tb is affordable and fast, and i haven’t had any problems with them
firecuda 530s are also decent but cost more and offer longer warranty and better lifespan
i like my 850w psu and have used corsair a lot
as for cases, look for good airflow options that fit your components well
7800X3D leading gaming CPU model CPU Benchmarks and Rankings 2025: Performance Order big quiet cooler Thermalright Phantom Spirit 120 – Top Review Elevating standards in performance, sound quality, and affordability. B650E mobo for pcie 5.0 M.2 fast rams PCIe 4.0 SSD matching SN850X in speed Random read/write rates are key metrics to focus on. factory OC 7800XT Case featuring front panel C design and built-in fans ATX 3.0 PSU with 16-pin power connector for upcoming NVIDIA GPUs. PSU Tier List updated to version 17.0g – Cultists Network The PSU tier list assists in selecting the optimal power supply from hundreds available, covering all price ranges. cultists.network PCPartPicker Part List CPU: AMD Ryzen 7 7800X3D 4.2 GHz 8-Core Processor ($369.99 @ Amazon) CPU Cooler: Thermalright Phantom Spirit 66.17 CFM ($40.90 @ Amazon) Motherboard: ASRock B650E PG RIPTIDE WIFI ATX AM5 ($239.99 @ Amazon) Memory: Patriot Viper Venom 32 GB (2 x 16 GB) DDR5-6400 CL32 ($97.99 @ B&H) Storage: ADATA Legend 960 2 TB M.2-2280 PCIe 4.0 X4 NVME SSD ($111.06 @ MemoryC) Video Card: PowerColor Hellhound OC Radeon RX 7800 XT 16 GB ($519.99 @ Amazon) Case: Montech AIR 903 MAX ATX Mid Tower Case ($72.98 @ Amazon) Power Supply: Thermaltake Toughpower GF A3 - TT Premium Edition 750 W (80+ Gold Certified, Fully Modular ATX) Generated by PCPartPicker 2023-10-23 04:30 EDT-0400