Disable any screen display and continuous restart after activating PTT and Secure Boot.
Disable any screen display and continuous restart after activating PTT and Secure Boot.
No Display and Continuous Restart Loop after Enabling PTT and Secure Boot on Gigabyte GA-H110M-DS2 DDR4 Hi everyone, I'm having a serious issue with my computer after enabling PTT (Platform Trust Technology) and Secure Boot in the BIOS. Here are the details: System Specifications: - Motherboard:Gigabyte GA-H110M-DS2 DDR4 - CPU: I5 7400 - RAM: Hyperx 2x4g 2133 Mhz - GPU: Rx580 sapphire nitro plus - Power Supply: Crosair 650w Problem Description: - After enabling PTT and Secure Boot in the BIOS, my computer started to continuously restart after a few seconds without displaying anything on the screen. - I have tried removing the CMOS battery to reset the BIOS settings and have also tried booting with only one stick of RAM installed, but the issue persists. Steps Taken: 1. Removed the CMOS battery for over 10 minutes to reset BIOS. 2. Tried booting with minimal configuration (only CPU, one stick of RAM, and integrated graphics). 3. Verified power supply connections and tried a different power supply. 4. Attempted to enter BIOS blindly and reset to default settings. 5. Checked all connections and reseated components. 6. Tried different monitor and cables. Symptoms: - No display output on the monitor. - The system restarts every few seconds. I would appreciate any advice or suggestions on how to resolve this issue. Thanks in advance for your help!
I attempted to delete the storage driver to check for BIOS access, but it didn<|pad|>, nothing happened.