Did the OC function properly on your RX 5700?
Did the OC function properly on your RX 5700?
These are my current settings based on the guide.
I'm unsure if it functions properly since the core clock doesn't reach 1950 and the memory clock is off.
It might be better not to overclock but rather to undervolt. This maintains a lower temperature, allowing the clock to run faster and more consistently without increasing the speed slider.
This process is straightforward—press the three dots, select Reset Settings, and reset Wattman to its default settings, returning to automatic controls. After that, use the Automatic Undervolt option and test it for a while. Observe if the cooling improves, fan noise decreases, and game performance becomes more stable.
Always check actual FPS in benchmarks; overclocking the 5700 typically offers minimal FPS gains and may cause stuttering when the clock speed changes.
It might be better not to push the overclock but rather to lower the voltage. This helps maintain a cooler temperature, allowing the clock to run faster and more consistently without increasing the speed slider.
This process is quite simple—press the three dots, then select Reset Settings. That will reset Wattman to its default settings and switch back to automatic controls. Next, press the Automatic Undervolt button and test it for a while. Observe if it reduces the card's temperature, lowers fan noise, and improves stability in gaming.
Always check your actual FPS during benchmarks. Overclocking the 5700 often doesn’t significantly boost FPS and can even cause stutter when overheating. I tend to favor finding the lowest stable voltage instead of chasing higher speeds.
This statement holds for numerous AMD boards and certain NVIDIA models.
You might consider an overclock paired with an undervolt. The temperatures appear to be quite low.
You could try some benching to observe the real benefits in terms of actual FPS improvements. Pay close attention while playing and watch for any stuttering due to fluctuating frame rates as performance improves. Reaching the right balance can be challenging, and often only a slight increase in FPS is noticeable. This particular situation wasn't worth it for me, though my card does have some unique characteristics.
Played black desert online yesterday using remastered settings, didn't hear any fans and stayed below 70c. I used max 1950 core clock and undervolt. Had several issues with fortnite but it felt like a duo. Enhanced Sync was needed, and I had to set a minimum clock.
The main goal of manually adjusting GPUs and CPUs is to locate the most stable voltage for a specific frequency. "Auto" settings can reach this point, but they seldom match the precision you can achieve by setting voltages manually.
Your choice about aiming for a frequency higher, equal to, or lower than the stock level is entirely up to you.
It looks unusual in the linked article that they used -80mV and only managed -12W...
I haven't upgraded to Adrenalin 2020 drivers yet. I don't prefer the new WattMan interface. Just three frequency options? Not my style.