Did the new GPU installation go smoothly?
Did the new GPU installation go smoothly?
Hello! I recently acquired the Sparkle B580 Roc Luna OC Ultra GPU, which features a TDP of 210W and includes dual 6+2 PCIe connectors. I’m checking to confirm that all setup steps were correct and that the GPU is functioning properly, since my previous RX6600 stopped working after prolonged pairing with an older, less reliable PSU (or at least I thought so).
I purchased a fresh XPG Core Reactor II 750W power supply, which is A+ rated, and installed it alongside the GPU two days ago. After booting Windows in safe mode, I removed the old AMD drivers using DDU and then installed the latest Intel drivers from the official site. So far, everything seems to be operating correctly.
Additionally, I swapped out my CPU—from an older Ryzen 2600 to a 5700x—and everything appears to function well. I was considering upgrading the motherboard (fearing potential damage from the previous PSU), but since the old motherboard worked fine with the new PSU and GPU, I’m leaning toward keeping it and saving on the cost.
However, there’s something concerning now. When I power on the PC, it briefly powers up for a few seconds before shutting off and then restarting normally. This behavior didn’t occur before installing the new PSU and GPU. If I power off the PC and turn it back on without unplugging it, it boots immediately.
I’m worried about potential issues with the motherboard or installation mistakes that could harm the GPU, especially since a "click" sound is heard when the GPU powers down. This is unusual.
I also have a couple of questions:
- The Sparkle ROC has two 6+2 PCIe slots. I connected it to the PSU using one cable with two 6+2 PCIe connectors. Is that acceptable? Should I use different cables?
- Should I perform some tests to verify everything is working properly and at safe temperatures? How can I do that?
I’m eager to run some stress tests and ensure stability before finalizing this build, especially after experiencing so many issues recently.
I want to verify that everything is in order and the GPU remains stable, since my old RX6600 stopped pairing after prolonged use with an outdated PSU (or at least I thought so). If other components connected to that PSU were affected over time, parts like storage, RAM, or the motherboard could fail or become unstable. Could you provide the model, year, and age of the suspected PSU?
I also switched from my old Ryzen 2600 to a 5700x processor. Did you update the BIOS on your motherboard before replacing the CPUs? Besides that, the board has a weak VRM section. The B450 chipset was built for the Ryzen 2000 lineup. The Ryzen 3000 and 5000 series require more power than the Ryzen 1000 and 2000 models.
When I connect the PC and power it on, it briefly powers up, then shuts off before restarting normally. This seems to let the motherboard capacitors recharge. After charging, the system boots and you can access the OS GUI. If everything works smoothly with your new GPU, you should feel confident.
It was a "Be quiet! Straight Power E9 600 W", about eight years old... I didn't realize how crucial a quality PSU was. I learned my mistake the hard way and won't repeat it.
I updated the BIOS before swapping the processors. I'm also aware my motherboard isn't ideal for this configuration, but if it runs smoothly without major performance drops, I'd keep it temporarily and upgrade later when I can afford it. Only then would I worry about other components being affected.
So, is this normal? And regarding using one cable with two 6+2 PCIe connectors versus having two separate cables—what's better? I've tried to research, but some say it doesn't matter, while others prefer the latter. This is my first experience with a GPU that has double connectors, so I'm still figuring things out.
I'm also aware that my motherboard isn't ideal for this configuration.
Your PSU wasn't optimal either. Still, if you notice stutters during your build, it's probably due to thermal throttling on your motherboard VRM, which would slow down your CPU.
But only if this motherboard affects other parts would be my concern.
You might want to avoid using uncertain hardware so you can use your computer with confidence every day.
This is my first experience with a GPU that has a double connector, so I'm still learning.
https://knowledge.seasonic.com/arti...ar...hics-cards
Power Supply: Precaution for Antec PCI-E Cable Use
Before constructing your perfect PC, here are some tips regarding Antec PCI-E cable connections. The PCI-E header supplies power to the GPU. A single cable typically holds 2 x 6+2 pin headers. Recently, high-end GPUs have seen increased power usage. Thus, it's strongly advised that if your GPU model demands...
www.antec.com
https://www.silverstonetek.com/en/tech-t...connection
Look for the shared point?
That's what I've been focusing on with the recent upgrades, especially the PSU. However, my budget remains a constraint, so I have to make the best choices possible. Most importantly, I aim to prioritize safety for all components.
I see, that's precisely what I was aiming for. Thank you!