F5F Stay Refreshed Hardware Desktop Did I take out a stick of RAM while the computer was still connected?

Did I take out a stick of RAM while the computer was still connected?

Did I take out a stick of RAM while the computer was still connected?

Z
Zerstouerneun
Member
186
10-03-2025, 12:08 AM
#1
I turned off my computer, didn’t unplug it, removed one of my RAM sticks, and after that it wouldn’t boot. When I powered it back on everything was on but the fans were loud and the power supply sounded like it might fail. I unplugged it then. Can I fix this? What would be the cost?
Z
Zerstouerneun
10-03-2025, 12:08 AM #1

I turned off my computer, didn’t unplug it, removed one of my RAM sticks, and after that it wouldn’t boot. When I powered it back on everything was on but the fans were loud and the power supply sounded like it might fail. I unplugged it then. Can I fix this? What would be the cost?

G
Go_Guten
Member
127
10-17-2025, 09:32 PM
#2
Welcome to the forums, newcomer! I was thinking we could try placing rams in the 2nd and 4th positions if you count from the left. You might want to check if clearing the CMOS makes a difference. The power supply unit in your setup seems a bit low quality. It also appears like a prebuilt unit. If it is a prebuilt model, please share the make, model, and SKU. If the system uses off-the-shelf components, list the specifications as follows: CPU, CPU cooler, Motherboard, RAM, SSD/HDD, GPU, PSU, Chassis, OS, Monitor. Also include the age of the power supply unit along with its make and model.
G
Go_Guten
10-17-2025, 09:32 PM #2

Welcome to the forums, newcomer! I was thinking we could try placing rams in the 2nd and 4th positions if you count from the left. You might want to check if clearing the CMOS makes a difference. The power supply unit in your setup seems a bit low quality. It also appears like a prebuilt unit. If it is a prebuilt model, please share the make, model, and SKU. If the system uses off-the-shelf components, list the specifications as follows: CPU, CPU cooler, Motherboard, RAM, SSD/HDD, GPU, PSU, Chassis, OS, Monitor. Also include the age of the power supply unit along with its make and model.

Z
Zorro340
Junior Member
48
10-19-2025, 02:26 AM
#3
Use an eraser to clean the ram module contacts.
Remove dust from the ram slots.
The area is very dirty inside.
Z
Zorro340
10-19-2025, 02:26 AM #3

Use an eraser to clean the ram module contacts.
Remove dust from the ram slots.
The area is very dirty inside.

N
Nedzer2k
Member
72
10-19-2025, 03:38 AM
#4
Thanks, I changed my first and last RAM sticks and the PC started up just fine, so I'm not sure if that was the solution or something else.
N
Nedzer2k
10-19-2025, 03:38 AM #4

Thanks, I changed my first and last RAM sticks and the PC started up just fine, so I'm not sure if that was the solution or something else.