F5F Stay Refreshed Power Users Networks Device uses several assigned IPs but incorrect MAC address.

Device uses several assigned IPs but incorrect MAC address.

Device uses several assigned IPs but incorrect MAC address.

T
timmyblack
Member
229
07-23-2016, 07:06 PM
#1
Check the issue step by step. Since you're using a desktop with a Powerline adapter, ensure it's properly connected and functioning. Also, verify that the Wi-Fi adapter was working before disconnecting it. If the problem persists, try restarting your router or checking for any interference from other devices.
T
timmyblack
07-23-2016, 07:06 PM #1

Check the issue step by step. Since you're using a desktop with a Powerline adapter, ensure it's properly connected and functioning. Also, verify that the Wi-Fi adapter was working before disconnecting it. If the problem persists, try restarting your router or checking for any interference from other devices.

F
Fiery__Phoenix
Junior Member
13
07-27-2016, 09:33 PM
#2
Refers to an APIPA IP address. The Mac should remain unchanged. All network interfaces listed via ipconfig.
F
Fiery__Phoenix
07-27-2016, 09:33 PM #2

Refers to an APIPA IP address. The Mac should remain unchanged. All network interfaces listed via ipconfig.

1
111carys111
Posting Freak
832
07-29-2016, 08:11 AM
#3
The IP address shown in the command prompt differs from the MAC address displayed when connecting to the router via the web interface.
1
111carys111
07-29-2016, 08:11 AM #3

The IP address shown in the command prompt differs from the MAC address displayed when connecting to the router via the web interface.

Z
zekepeanut
Junior Member
4
07-30-2016, 06:10 PM
#4
Confirm you're targeting the right client on the router. Verify the MAC address on the real device or in the packaging if available.
Z
zekepeanut
07-30-2016, 06:10 PM #4

Confirm you're targeting the right client on the router. Verify the MAC address on the real device or in the packaging if available.

J
justkillex
Junior Member
34
07-31-2016, 03:02 AM
#5
No switch is present between the router and the powerline adapter. The powerline adapter model is not specified. The command output shows connectivity attempts and status messages but no detailed error codes or specific device names.
J
justkillex
07-31-2016, 03:02 AM #5

No switch is present between the router and the powerline adapter. The powerline adapter model is not specified. The command output shows connectivity attempts and status messages but no detailed error codes or specific device names.