Device that uses Wi-Fi exclusively over Ethernet connection
Device that uses Wi-Fi exclusively over Ethernet connection
The space where your router is located should share the same electrical circuit as the sockets for stability. Using Wi-Fi for a server is usually not recommended. For better reliability, you could place the server in the same room as the router and connect it remotely—this would likely offer a smoother experience.
The issue lies with the server and WiFi setup. Running it on WiFi for years suggests potential stability problems, while placing it in an area without usable cables indicates connectivity challenges. The goal is to connect it to WiFi without needing physical cabling.
WiFi often struggles with consistency, particularly when handling large amounts of data. As I mentioned earlier, you might want to consider a wireless bridge. You can look up options on sites like Newegg or Amazon; they usually carry suitable products.
I had been using it with WiFi while Windows Server was installed. I decided to switch to Linux, but the area with the router didn’t have enough space—it wasn’t blocking anything. It’s right next to several files and two computers.
I've checked for those items, but I only find Wi-Fi extenders and access points.
According to what I understand, a USB WiFi adapter functions on all PCs, though it costs around ten dollars. Ethernet via power is reliable, but it can be expensive—about two hundred dollars on a good day.
USB networking isn't very good at its best. The person asking the question is using an unfamiliar version of Linux. While Linux usually supports WiFi, only certain major distributions do. Have you considered switching your router to a mesh network setup? It could really help fix the issue.
I'm using my laptop through a Targus dock because it lacks built-in Ethernet. *GeForce NOW appears to function smoothly at 1080P via the dock's Ethernet connection.*
I test it on clients and haven’t encountered any issues. But I wouldn’t deploy it on a server because it often requires connecting to Wi-Fi or Ethernet adapters—just about once a month, which is still too common for a server setup.
@PeachGr recommended using USB WiFi. It’s not ideal. USB Ethernet functions, so I prefer it over USB, but I don’t want to rely on it unless absolutely necessary. Even then, keep your expectations realistic.