F5F Stay Refreshed Hardware Desktop Device stops sending updates regardless of reset method, either physical or firmware-based.

Device stops sending updates regardless of reset method, either physical or firmware-based.

Device stops sending updates regardless of reset method, either physical or firmware-based.

G
ghostghillie07
Member
234
05-13-2022, 09:02 AM
#1
The issue involves restarting my new system after using the RESET button. The machine powers down completely, the CPU fan continues to spin, and no graphics appear or the system fails to boot. I’m running Linux Live USB on an AMD Ryzen 5700X with 64GB RAM, a 350W SilverStone Flex PSU, and the BIOS versions are 4402, 4410, or 4604. The problem started after exiting BIOS and saving settings.
G
ghostghillie07
05-13-2022, 09:02 AM #1

The issue involves restarting my new system after using the RESET button. The machine powers down completely, the CPU fan continues to spin, and no graphics appear or the system fails to boot. I’m running Linux Live USB on an AMD Ryzen 5700X with 64GB RAM, a 350W SilverStone Flex PSU, and the BIOS versions are 4402, 4410, or 4604. The problem started after exiting BIOS and saving settings.

I
IAmLiam
Member
193
05-17-2022, 08:31 PM
#2
Which graphics card is connected? Are your power and reset buttons properly linked? Which options are you adjusting during the BIOS setup?
I
IAmLiam
05-17-2022, 08:31 PM #2

Which graphics card is connected? Are your power and reset buttons properly linked? Which options are you adjusting during the BIOS setup?

E
ExoSpade
Junior Member
32
06-06-2022, 09:34 AM
#3
You're asking for more details on what "reset" means in this context. It could refer to clearing settings, restarting the system, or reinitializing hardware. You mentioned checking the front panel I/O and trying an older BIOS version—good steps to troubleshoot.
E
ExoSpade
06-06-2022, 09:34 AM #3

You're asking for more details on what "reset" means in this context. It could refer to clearing settings, restarting the system, or reinitializing hardware. You mentioned checking the front panel I/O and trying an older BIOS version—good steps to troubleshoot.

E
erik_24022005
Member
158
06-06-2022, 09:42 AM
#4
Restart via the main interface or the "Save and reset" option in the BIOS. It works even if you don't adjust any BIOS settings.
E
erik_24022005
06-06-2022, 09:42 AM #4

Restart via the main interface or the "Save and reset" option in the BIOS. It works even if you don't adjust any BIOS settings.

F
FrenchTost
Member
204
06-06-2022, 11:19 AM
#5
It seems the issue vanished. The early problems were just before my first full OS startup.
F
FrenchTost
06-06-2022, 11:19 AM #5

It seems the issue vanished. The early problems were just before my first full OS startup.