Device setup encountering startup issues due to Wi-Fi adapter card.
Device setup encountering startup issues due to Wi-Fi adapter card.
Installed the PCIe X1 Wi-Fi adapter and laptop Wi-Fi module, but upon restarting the PC the SATA SSD remains unused at 100% capacity, forcing Windows to reinstall. Configuration steps were followed: AsRock B365M Pro4 with Intel 9600/RX480/5 SATA drivers, tested on other machines. No video card detection occurred post-installation (ASUS B85M-K with Intel CPU/RX480/2 SATA drives). After a cold boot the next day, the issue persisted. Possible reasons: insufficient lane availability for the adapter? The problem emerged only after extended power-off periods? Seek advice if needed.
Tried changing SATA ports as well, but the issue persisted. The module is an Atheros QCWB335 with Bluetooth. After looking into the topic, I attempted again using an Atheros AR9485 (no Bluetooth), a salvaged laptop from a broken device, and it worked fine. I found out that for Wi-Fi plus Bluetooth compatibility, you need an adapter with a USB connector to transfer BT data through it—only two pins (USB D+ and USB D-), though some adapters include a ground wire. This is quite frustrating. I think I should consider buying a BT USB dongle if necessary. I’ll keep an eye on the situation in the coming days and return if I encounter the same problem, hoping it doesn’t happen. Thanks.