Device refuses to operate once RAM is configured to the claimed 3600 MHz frequency.

F5F Stay Refreshed Hardware Desktop Device refuses to operate once RAM is configured to the claimed 3600 MHz frequency.

Rewyrr
Junior Member

03-21-2019, 03:53 AM

I just installed a new PC and purchased the Corsair Vengeance LPX Pro 16GB RGB (2x8) RAM. I'm aiming for the advertised speed of 3600MHz, but when I adjust it in the BIOS and enable A-XMP, the system powers on but doesn't display anything. To resolve this, I need to flash the BIOS, which then resets everything. My motherboard model is MSI MGPX X570 Gaming with a Ryzen 7 3700X CPU.

Rewyrr

03-21-2019, 03:53 AM #1

Olivethedog
Junior Member

03-21-2019, 04:26 AM

3600Mhz is compatible with a Ryzen 3rd generation chip, though it exceeds the recommended limits. It’s better to slightly increase the voltage for RAM and memory controllers.

Olivethedog

03-21-2019, 04:26 AM #2

3600Mhz is compatible with a Ryzen 3rd generation chip, though it exceeds the recommended limits. It’s better to slightly increase the voltage for RAM and memory controllers.

MegalyRetro
Junior Member

03-23-2019, 11:53 AM

Also explore this guide on overclocking memory.

MegalyRetro

03-23-2019, 11:53 AM #3

Also explore this guide on overclocking memory.

EggsyDiamond
Member

166

03-24-2019, 01:43 PM

The 3700X supports 3200MHz memory, which likely explains the issue. Adjusting it to 3200 should resolve the problem.

EggsyDiamond

03-24-2019, 01:43 PM #4

The 3700X supports 3200MHz memory, which likely explains the issue. Adjusting it to 3200 should resolve the problem.