Device powers down following Q-Code A0 input. No screen output available. BIOS access is blocked.
Device powers down following Q-Code A0 input. No screen output available. BIOS access is blocked.
I've shared another clip about the problem. Likely related to the recently returned RAM. The computer fails to boot, showing Q-Code 48 or 2C, then A0, and it stops working entirely. No display appears on the monitor, and BIOS entry isn't possible. I've tested: RMA MOBO (X670E Crosshair Hero), CPU (R9 7950X), RAM (Adata Lancer DDR5 2x32GB). Used one stick (DIMM_A2) plus two sticks (DIMM_A2, B2). Updated BIOS and removed all USB ports. The issue persists in the video. Any suggestions? PXL_20240119_164025360~2.mov Thanks!
The system should start properly by ensuring the GPU is connected since it handles video output. Without it, the CPU won't function correctly.
28/2C are connected to memory startup and appear normal. If you remove the internal M.2/SATA drives, what occurs?
I removed all the M2/SATA connections and tried to reconnect them individually. Each one still faced the same problem. I recorded another short clip showing the issue. Could it be related to the RAM that was just returned for replacement? Please let me know.