Device fails to start. Check system requirements and power connections.

F5F Stay Refreshed Hardware Desktop Device fails to start. Check system requirements and power connections.

Pages (3): 1 2 3 Next

Kitiku
Junior Member

09-06-2023, 12:54 AM

I powered on my computer and it didn’t start properly. The loading screen appears but then disappears completely. Changing the graphics drivers (pressing Win + Ctrl + Shift + B) causes the screen to flash white briefly before returning to black. With exams approaching, I need a solution fast. Anyone have suggestions?

Kitiku

09-06-2023, 12:54 AM #1

Raysns
Member

110

09-11-2023, 10:34 AM

Attempt to launch it in safe mode. Once it restarts a few times, Windows should initiate the troubleshooting service enabling a boot into this setting.

Raysns

09-11-2023, 10:34 AM #2

Attempt to launch it in safe mode. Once it restarts a few times, Windows should initiate the troubleshooting service enabling a boot into this setting.

Mario10Gamer
Member

188

09-11-2023, 02:23 PM

Je moet de shift-knop drukken terwijl je de machine uitboott, zelfs als het scherm donker is.

Mario10Gamer

09-11-2023, 02:23 PM #3

Je moet de shift-knop drukken terwijl je de machine uitboott, zelfs als het scherm donker is.

Surgeon3
Member

144

09-11-2023, 05:30 PM

Pressing shift is only half of the way. When you are booting is there a little part at the bottom of the screen that says something like press F12 or DEL to get into bios.

Surgeon3

09-11-2023, 05:30 PM #4

Pressing shift is only half of the way. When you are booting is there a little part at the bottom of the screen that says something like press F12 or DEL to get into bios.

iGreenDay
Junior Member

09-17-2023, 03:29 AM

You can't enter safemode due to a hardware problem. If it's a software issue, try pressing the restart button several times. If the Windows troubleshooter doesn't work, test using a different display device or HDMI/VGA/DP port. Please share more details about your device—whether it's a PC or laptop—to get better assistance.

iGreenDay

09-17-2023, 03:29 AM #5

Linouka
Junior Member

09-19-2023, 02:08 AM

Displays the BIOS settings
It confirms the BIOS status
Shows the system configuration details

Linouka

09-19-2023, 02:08 AM #6

Displays the BIOS settings
It confirms the BIOS status
Shows the system configuration details

FLPFive
Member

170

09-21-2023, 02:19 AM

He mentioned having a 15-1600kf, which means no IGPU needed.

FLPFive

09-21-2023, 02:19 AM #7

He mentioned having a 15-1600kf, which means no IGPU needed.

tcunhaa
Junior Member

09-21-2023, 08:09 AM

Yes, you can easily move around and see your surroundings clearly without the display going dark.

tcunhaa

09-21-2023, 08:09 AM #8

Yes, you can easily move around and see your surroundings clearly without the display going dark.

Russin
Member

161

09-21-2023, 09:28 AM

It appears to be a PC with unknown specifications, possibly an Intel I3 processor and no graphics card. The issue seems to stem from a software problem, as it boots into the BIOS. There is only one HDMI port available.

Russin

09-21-2023, 09:28 AM #9

IPS10
Senior Member

623

09-23-2023, 05:21 AM

#10

Yes

IPS10

09-23-2023, 05:21 AM #10

Yes

Pages (3): 1 2 3 Next