Device fails to start?

Thiago8PvP
Junior Member

02-22-2018, 10:56 PM

I recently acquired a 5070 Ti and since my previous PSU lacked a PCIe slot, I had to purchase a replacement. After installing it and connecting everything as intended, the system isn’t booting. When I tried to power on the PC, the motherboard lights came on and the CPU cooler displayed a red warning sign. I’m still not sure what caused this issue, especially since I’m still getting familiar with building PCs.

Thiago8PvP

02-22-2018, 10:56 PM #1

Leify9
Member

02-28-2018, 01:54 AM

No, I didn't alter all the cables during the PSU swap.

Leify9

02-28-2018, 01:54 AM #2

No, I didn't alter all the cables during the PSU swap.

TrueBlueG
Junior Member

02-28-2018, 05:32 AM

I confirmed the installation of the new cables.

TrueBlueG

02-28-2018, 05:32 AM #3

I confirmed the installation of the new cables.

senbonzakura13
Senior Member

372

03-01-2018, 04:14 PM

This appears to be a motherboard with an RGB cable visible in the top-right corner. The cooler pump for the CPU is likely connected, as it’s positioned there. The cable you see could be part of the RGB lighting setup.

senbonzakura13

03-01-2018, 04:14 PM #4

Vortex59_YT
Member

198

03-07-2018, 06:25 PM

It was the ASUS ROG STRIX Z790-H Gaming setup, and I linked the two SATA cables using one connection while keeping the RGB cable attached.

Vortex59_YT

03-07-2018, 06:25 PM #5

It was the ASUS ROG STRIX Z790-H Gaming setup, and I linked the two SATA cables using one connection while keeping the RGB cable attached.

DreicosworldHD
Junior Member

03-07-2018, 08:17 PM

Certain hardware units may refuse to power up without the necessary header data, such as a warning indicator on the cooling component.

DreicosworldHD

03-07-2018, 08:17 PM #6

Certain hardware units may refuse to power up without the necessary header data, such as a warning indicator on the cooling component.

Persiphany
Member

159

03-07-2018, 11:37 PM

What is the correct header name for CPU fan in your system?

Persiphany

03-07-2018, 11:37 PM #7

What is the correct header name for CPU fan in your system?

Vincie_
Member

209

03-09-2018, 09:50 PM

That's fine. The AIO you're using is CPU_FAN and AIO_PUMP for the yellow unit. Just make sure the CPU fan setting matches what you intended.

Vincie_

03-09-2018, 09:50 PM #8

That's fine. The AIO you're using is CPU_FAN and AIO_PUMP for the yellow unit. Just make sure the CPU fan setting matches what you intended.

datmando
Member

03-10-2018, 03:53 AM

It's the Corsair Icue H150i Elite LCD with an extra wire running from inside the display near the CPU fan area.

datmando

03-10-2018, 03:53 AM #9

It's the Corsair Icue H150i Elite LCD with an extra wire running from inside the display near the CPU fan area.