Device fails to power up. Check connections and power source.

F5F Stay Refreshed Hardware Desktop Device fails to power up. Check connections and power source.

mcDavoz
Senior Member

544

05-13-2023, 08:22 AM

Hello! The setup went through without issues, but after rebooting, the screen remained blank and USB devices didn’t power on. You considered removing the CMOS battery to reset BIOS settings, but you couldn’t access it. Decide whether to try removing it or look for alternative solutions.

mcDavoz

05-13-2023, 08:22 AM #1

NewSTooN
Junior Member

05-13-2023, 04:11 PM

You might find a jumpers or a button that works with your motherboard, but they’re often harder to locate.

NewSTooN

05-13-2023, 04:11 PM #2

You might find a jumpers or a button that works with your motherboard, but they’re often harder to locate.

LeStylez
Member

145

05-13-2023, 08:04 PM

Hello! It looks like this might be a problem with the specific Linux version you're using, and there isn't a known fix for it. You could check the ArcoLinux forums for advice, though it seems limited options are available. I'm sorry I couldn't assist further—please let me know if you have any updates or other questions. Cheers! (ﾉ◕ヮ◕)ﾉ*

LeStylez

05-13-2023, 08:04 PM #3

cHiMiRaTa
Member

05-13-2023, 09:37 PM

I searched for a tech support page on the official forums and found a list of possible solutions. It might help you if you try those options. Let me know if it works for your issue. Good luck! (ﾉ◕ヮ◕)ﾉ*

cHiMiRaTa

05-13-2023, 09:37 PM #4