F5F Stay Refreshed Hardware Desktop Device fails to power on following a memory upgrade.

Device fails to power on following a memory upgrade.

Device fails to power on following a memory upgrade.

B
bellaaa_
Member
Find
173
05-25-2017, 02:16 PM
#1
I upgraded from 4gb(2x2) to 8 GB(2x2 + 4) then the system didn't power on (no boot animation and it restarted). My specs are Intel I3 550 Intel Dh55tc motherboard, 2x2 Kingston kvr1333d3s8n9/2g-sp, 4 GB RAM axel rmr5030ef68f9w-1600. I tried various slot combinations (including dual channel), reinstalled Windows 10 again with the same issue, and used another hard drive with Windows 7 on the same hardware before.
Reply
Reply
B
bellaaa_
05-25-2017, 02:16 PM #1

I upgraded from 4gb(2x2) to 8 GB(2x2 + 4) then the system didn't power on (no boot animation and it restarted). My specs are Intel I3 550 Intel Dh55tc motherboard, 2x2 Kingston kvr1333d3s8n9/2g-sp, 4 GB RAM axel rmr5030ef68f9w-1600. I tried various slot combinations (including dual channel), reinstalled Windows 10 again with the same issue, and used another hard drive with Windows 7 on the same hardware before.

Reply
Reply
S
Sket
Junior Member
Find
38
05-25-2017, 02:25 PM
#2
It depends on whether the new RAM is compatible and functional. If the Kingston module is faulty or incompatible, the system may not boot at all. Otherwise, it might still work if the RAM is working properly.
Reply
Reply
S
Sket
05-25-2017, 02:25 PM #2

It depends on whether the new RAM is compatible and functional. If the Kingston module is faulty or incompatible, the system may not boot at all. Otherwise, it might still work if the RAM is working properly.

Reply
Reply
G
Goku_Jerome
Senior Member
Find
428
05-25-2017, 05:40 PM
#3
It's a poor idea to combine different RAM types in one system. Stick to one kind and speed for smooth performance. I tried mixing two speeds once, but it failed. I picked the faster one, then the slower one couldn't keep up. Thay
Reply
Reply
G
Goku_Jerome
05-25-2017, 05:40 PM #3

It's a poor idea to combine different RAM types in one system. Stick to one kind and speed for smooth performance. I tried mixing two speeds once, but it failed. I picked the faster one, then the slower one couldn't keep up. Thay

Reply
Reply
P
Papyrule
Senior Member
Find
560
05-29-2017, 01:27 AM
#4
Disable the CMOS and attempt to boot once more.
Reply
Reply
P
Papyrule
05-29-2017, 01:27 AM #4

Disable the CMOS and attempt to boot once more.

Reply
Reply
P
Popizejones
Junior Member
Find
10
05-29-2017, 02:19 AM
#5
The system starts up with both options, but I’m unsure if "boot" fits the context. It works with Windows without adding extra RAM.
Reply
Reply
P
Popizejones
05-29-2017, 02:19 AM #5

The system starts up with both options, but I’m unsure if "boot" fits the context. It works with Windows without adding extra RAM.

Reply
Reply
K
KablooieKablam
Posting Freak
Find
908
06-03-2017, 12:29 AM
#6
Test the new RAM individually and run Windows to verify functionality. Switch to the old RAM separately and repeat the process. Try combining both at once; if it starts crashing, restart the system. The RAM modules are interfering with each other. If you can't locate the same module you have, upgrade by purchasing matching pairs and replacing all existing RAM. Mixing different RAM sticks is not recommended as speed and timing settings vary, which may lead to problems. One stick might require 1.2V while another needs 1.3V, etc., potentially causing issues. I assume it's an i3-550 model using DDR3; for a replacement, consider using two 4GB DDR3 sticks to replace everything.
Reply
Reply
K
KablooieKablam
06-03-2017, 12:29 AM #6

Test the new RAM individually and run Windows to verify functionality. Switch to the old RAM separately and repeat the process. Try combining both at once; if it starts crashing, restart the system. The RAM modules are interfering with each other. If you can't locate the same module you have, upgrade by purchasing matching pairs and replacing all existing RAM. Mixing different RAM sticks is not recommended as speed and timing settings vary, which may lead to problems. One stick might require 1.2V while another needs 1.3V, etc., potentially causing issues. I assume it's an i3-550 model using DDR3; for a replacement, consider using two 4GB DDR3 sticks to replace everything.

Reply
Reply