Device fails to power on.
Device fails to power on.
Hello, I assembled the gaming PC almost completely. The CPU and coolers are still missing because Amazon didn’t deliver the CPU on time. To keep things going, I built it without the CPU to test the situation. Everything seems fine, but it doesn’t start up. When I power on the PSU, only the top right side lights up in RGB. Is this a sign of a build error or just the CPU being absent? My main concern is whether any components can run without the CPU—like fans and other parts. The build looks okay so far, but I’m hoping the CPU arrives tomorrow.
Some motherboards can update their BIOS without needing a CPU, though this isn't the same as running without one.
Chain the 8-pin connector together. This cable can handle up to 150W, but you're attempting to push closer to 250W. Consider using an additional dedicated 8-pin from the PSU.
Hello! Yes, I have Discord. My Discord is named "lujuru." Regarding daisy chaining, it refers to connecting devices in a series so that the output of one powers the next, typically used for lighting setups. The top right usually shows the connection status or settings.
If those images are correct, you're attempting to power a graphics card with three power connectors using only a single cable. You'll likely need at least two cables, since one won't suffice. Based on my experience, you can generally manage by connecting two headers together with one cable, though you'll still require at least two cables overall. Ideally, each header should have its own cable, but using two cables allows you to chain them and work around the limitation.
I also want to note that with newly built AMD systems, you might not see the system boot right away after powering it on. This is normal when using a new CPU and/or RAM, as the motherboard needs time to configure itself. Regarding RAM compatibility, it's best to check the product page of your motherboard vendor to confirm if your chosen RAM model works with the board. From what I know, speeds above 6000MHz don't seem to function well on AMD boards. Also, please share a summary of your hardware so we can offer more tailored advice.
Alright I understand what you're talking about and I've fixed it. Everything boots up now but there's one small problem. There's a button at the top of my case that's constantly flashing red. I don't know what it is or what it's for but it's always flashing red. https://pcpartpicker.com/list/Y7xTv3 here is my case as well
This usually isn't a problem. The bright light is probably from the hard drive spinning. When your PC is accessing or storing data from a drive, it will cause the light to flash. This is typical in many computer cases.