Device fails to display output.
Device fails to display output.
Pentium G5400 Gold 3.7GHz CPU, 8GB RAM, 2400MHz DDR4, ASUS Prime H310M-K motherboard
I uses integrated graphics which means it should work with the connector on the back of the motherboard. If no video comes out, I'll reset the CMOS memory and replace the battery. Then I'll verify the power supply is functioning. A 500W PSU is sufficient for this project, though dead capacitors could be an issue. Also, ensure the power switch operates correctly—over time contacts can corrode and dust may block them. Good luck!
I can confirm this more clearly. I know it has been started, it appears on the network, and I’ve verified the cable and display work properly on another device. The PC was purchased directly, and there were no prior issues reported. This is essentially a $50 system.
I haven't attempted to reset the CMOS memory yet, so I'll do that tomorrow morning after waking up. Thanks for reminding me—I really appreciate it.