Debugging on MSI in C5

F5F Stay Refreshed Hardware Desktop Debugging on MSI in C5

Ky0os62
Junior Member

09-17-2016, 10:12 AM

I changed the CPU placement, didn’t bend any pins, and didn’t take out the RAM yet, but I still see the C5 error and the RAM/CPU lights. Any suggestions?

Ky0os62

09-17-2016, 10:12 AM #1

I changed the CPU placement, didn’t bend any pins, and didn’t take out the RAM yet, but I still see the C5 error and the RAM/CPU lights. Any suggestions?

VebbiHD
Member

209

09-17-2016, 04:44 PM

What board and processor are you using? Have you tested one component at a time? Have you attempted a CMOS reset?

VebbiHD

09-17-2016, 04:44 PM #2

What board and processor are you using? Have you tested one component at a time? Have you attempted a CMOS reset?

Juan2610
Posting Freak

875

09-22-2016, 11:10 PM

I performed two CMOS checks. All four drives were tested, and results remained consistent.

Juan2610

09-22-2016, 11:10 PM #3

I performed two CMOS checks. All four drives were tested, and results remained consistent.

Freakiki
Member

09-23-2016, 12:26 AM

I performed two CMOS checks. All four drives were tested, and results remained consistent.

Freakiki

09-23-2016, 12:26 AM #4

I performed two CMOS checks. All four drives were tested, and results remained consistent.

Octopuce
Member

09-23-2016, 11:09 PM

The update indicates the problem was with my AM5 contact frame, which wasn't lowering the CPU sufficiently.

Octopuce

09-23-2016, 11:09 PM #5

The update indicates the problem was with my AM5 contact frame, which wasn't lowering the CPU sufficiently.